Fao Ian @ Godspeed brakes....
#1
Hi Ian,
I'm considering having an upgrade using your brakes...I have a MY99 with the standard 4 pots,and was wondering about a few things.
Can the bigger 308 discs be fitted with the standard calipers at all?...like is there a mod to the calipers etc...or can you only fit them with your replacement caliper.
If it is the latter,do you take the scooby calipers in part ex,or do I just keep them myself?
Secondly,as the bells are aluminium and the discs aren't,is there a danger of getting dissimilar metal corrosion where they meet?....I have seen this sort of thing happen with ali before...but not with brakes I have to confess...
Lastly,do you only supply Mintex 1144 pads,or do you have other options,and how long does it take to send out and order...
Regards,
I'm considering having an upgrade using your brakes...I have a MY99 with the standard 4 pots,and was wondering about a few things.
Can the bigger 308 discs be fitted with the standard calipers at all?...like is there a mod to the calipers etc...or can you only fit them with your replacement caliper.
If it is the latter,do you take the scooby calipers in part ex,or do I just keep them myself?
Secondly,as the bells are aluminium and the discs aren't,is there a danger of getting dissimilar metal corrosion where they meet?....I have seen this sort of thing happen with ali before...but not with brakes I have to confess...
Lastly,do you only supply Mintex 1144 pads,or do you have other options,and how long does it take to send out and order...
Regards,
#2
THE braking specialist
iTrader: (259)
Crusher , The 308mm kit we make is a complete kit with calipers , if you want to keep your surbaru four pots (which I would recommend)then we can supply you with a 294mm disc and bell which are the same dimensions as you original discs , if you try to fit the 308mm discs the caliper would need a bracket to bring it out , but going from 294mm to 308mm doesn't give enough room for a bracket , You can have any pads you want , we can supply anything , We do not have a problem with discs and bells as regards to corrosion , Delivery times are approx 7 - 10 days , depends how busy we are at the time , Hope this helps , Ian
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM
IanG1983
Wheels, Tyres & Brakes
1
22 September 2015 09:47 PM