Which alloys fit 330mm Godspeeds.
11 April 2006, 03:18 PM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jan 2006
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Which alloys fit 330mm Godspeeds.
Hi guys,
Need some new rims (ideally 17s) to fit my Godspeeds and widened calipers.
Who out there has this kit? and what wheels do you have ?
Cheers in advance.
Need some new rims (ideally 17s) to fit my Godspeeds and widened calipers.
Who out there has this kit? and what wheels do you have ?
Cheers in advance.
11 April 2006, 03:24 PM
#2
Scooby Regular
Join Date: May 2002
Location: www.ayrshirescoobies.com
Posts: 2,079
Likes: 0
Received 0 Likes
on
0 Posts
Most do, standard MY01 bugeye alloys fit, I have ET45 19s on and they fit.
I would go with the standard OE offset off the bugeye and you should be ok.
RR
I would go with the standard OE offset off the bugeye and you should be ok.
RR
11 April 2006, 03:36 PM
#3
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Jan 2006
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Cheers RR, we meet again !
You say most will fit - even 17s !?!
The offset on my current rims is 48mm, and there's about 3mm from the caliper to the spokes on the wheel ! I'm worried that I might not be so lucky on the next set. I either need to fit/try some first, or confidently buy some knowing that someone else has 'x' fitted.
You say most will fit - even 17s !?!
The offset on my current rims is 48mm, and there's about 3mm from the caliper to the spokes on the wheel ! I'm worried that I might not be so lucky on the next set. I either need to fit/try some first, or confidently buy some knowing that someone else has 'x' fitted.
11 April 2006, 06:47 PM
#6
Scooby Regular
Join Date: Sep 2000
Location: Deepest Darkest Dorset!!
Posts: 10,011
Likes: 0
Received 1 Like
on
1 Post
As far as i'm aware, any 17 inch wheel that fits over the statndard set-up four pots, will fit over the bigger 335!mm kit.......
I have the kit, with rota wheels... don't ask me what offset, but there acres of space between my wheels and calipers....
I have the kit, with rota wheels... don't ask me what offset, but there acres of space between my wheels and calipers....
12 April 2006, 08:21 AM
#7
Scooby Regular
Join Date: Dec 2002
Location: Sunny Dubai, epicentre of the shallow people
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
I have the Godspeed 335mm kit, which is really close with the standard Bugeye OEM 17's but fits fine. I bought some Rota SDR's (ET48) in a 17 as well for trackday use (they are 7.5" wide as opposed to 7" of the standard rims), and these actually had more clearance around the caliper than the OEM wheels.
Try Julian at RareRims http://www.rarerims.co.uk/index.php - top bloke and good prices
Neil
Try Julian at RareRims http://www.rarerims.co.uk/index.php - top bloke and good prices
Neil
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
stonejedi
Wheels And Tyres For Sale
7
21 September 2015 08:54 PM