HI. Would really like the full info on this one!

Am I right in saying that all Imprezas have the bolt pattern of 5x100 for the PCD?

From there, am I right in saying that the offsets vary from classic Impreza to New age and again the New age as a WRX is different to.

Would be great if someone could post up the actual offsets for each model and fitments etc.

Thanks in advance...

PCD is 5-100 for all except MY05 5-114.3. Offset for classics should be somewhere between et45 and et55 (except 22B), width 7" preferable, 7.5" max. MY01 and on are much more flexible for offset (et35 - et55 although standard is still et45 - et55) and width, although most people prefer the way the car drives on higher offset wheels.

navtheace

This isn't a definite list but hopefully covers all the std Impreza specs over the years.

Pre 2001MY cars were either
15" ET55 or 7x16" ET53

Later WRX (01MY on) is 7x17" ET55 and STi is 7.5x17" ET53

All are 5x100 PCD

The only exceptions to this are;

05MY STi which is a new PCD of 5x114.3 8x17" ET53

and the various UK LE's
Series McRae 6.5x16" ET55

22B 8.5x17 ET48

RB5 7x17" ET52

P1 7x17" ET52 or 7.5x18" ET53 option

UK300 7.5x18" ET53

WR1 8x18" ET51

Hope this helps

Mike

will these wheels fit my 2003 STI type uk?

8.0x18"

rota tarmac wheels

that would dpend on the offset?

what is the current wheel size and offset?
if you are going wider then a lower offset wil mean more clearance from the brake caliper, but also more chance of tyre rub.