Multi fittment help
01 June 2004, 09:43 PM
#1
Scooby Regular
Thread Starter
Join Date: Jul 2003
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
Multi fittment help
The Lenso are multi fittment, and I dont understand all the fitments that the wheel has 
Et 40 8x100/114.3
10x100.114.3
Of course if it was 5x114.3 I would understand as it would mean 5 stud with a 114.3 and a et 40.
So whats does the 8x and the 10x mean?
And am I right in thinking it's 100 and 114.3 fittment?
If so what are all the fittment possible?
Cheers!
Et 40 8x100/114.3
10x100.114.3
Of course if it was 5x114.3 I would understand as it would mean 5 stud with a 114.3 and a et 40.
So whats does the 8x and the 10x mean?
And am I right in thinking it's 100 and 114.3 fittment?
If so what are all the fittment possible?
Cheers!
01 June 2004, 10:37 PM
#3
Scooby Regular
Join Date: Aug 2003
Posts: 800
Likes: 0
Received 0 Likes
on
0 Posts
just attempting to reason..
I'd say the 8x is the
ooo
o o
ooo
pattern, with the diagonals being your 114, and the NSEW being 100.
10x similar but two pentagons. One 114 and one 100. So the 10x100/114 should be fine from a fitment point of view, not sure about the offset though (bit low?)
I've been having this trouble - not many websites give you the info, so you end up ringing round only to find out the ones you like don't fit
I'd say the 8x is the
ooo
o o
ooo
pattern, with the diagonals being your 114, and the NSEW being 100.
10x similar but two pentagons. One 114 and one 100. So the 10x100/114 should be fine from a fitment point of view, not sure about the offset though (bit low?)
I've been having this trouble - not many websites give you the info, so you end up ringing round only to find out the ones you like don't fit
Thread
Thread Starter
Forum
Replies
Last Post
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
