Notices
Wheels, Tyres & Brakes

Rear Pads?

Thread Tools
 
Search this Thread
 
Old 04 June 2001, 01:52 PM
  #1  
Mac's Power
Scooby Regular
Thread Starter
 
Mac's Power's Avatar
 
Join Date: Nov 2000
Posts: 452
Likes: 0
Received 0 Likes on 0 Posts
Post

What's your recommendation for rear pads guys? Mine are just gone.

Paul.
Old 05 June 2001, 09:35 AM
  #2  
JohnS
Moderator
iTrader: (1)
 
JohnS's Avatar
 
Join Date: Oct 1998
Location: Aberdeen/shire
Posts: 4,727
Likes: 0
Received 0 Likes on 0 Posts
Post

Paul,

I found that Mintex 1155s lasted very well, even with track use. I am now using cheap pads which I got from a local motor factors for about £13, including VAT! THese have been on for the past 9 months, and are just about worn out. At this cost, even if they only last one track day, they are cheaper than wearing out 1/3 of a set of 1155s, or DS2000s.
Old 05 June 2001, 01:32 PM
  #3  
TonyNesta
Scooby Regular
 
TonyNesta's Avatar
 
Join Date: Oct 1999
Posts: 1,124
Likes: 0
Received 0 Likes on 0 Posts
Post

I agree with John - Mintex 1155 are very good, a bit dusty but fairly good value. I paid about £50 for a set. Pagid Blue are excellent but very expensive !

[This message has been edited by TonyNesta (edited 05 June 2001).]
Old 05 June 2001, 02:00 PM
  #4  
Hoppy
Scooby Regular
 
Hoppy's Avatar
 
Join Date: Aug 2000
Location: Where age and treachery reins over youthful exuberance
Posts: 5,275
Likes: 0
Received 0 Likes on 0 Posts
Post

Paul, what rear discs have you got? If they are vented MY99/00 you should be okay. I use DS2000 and am very happy to recommend them.

I've heard that the earlier non-vented rear discs can warp with hotter pads.

Richard.
Old 05 June 2001, 02:47 PM
  #5  
Mac's Power
Scooby Regular
Thread Starter
 
Mac's Power's Avatar
 
Join Date: Nov 2000
Posts: 452
Likes: 0
Received 0 Likes on 0 Posts
Post

I'm running prodrive/alcon setup at the front with pagid blues and standard discs and pads at the rear. If that helps. I only get 2 track days out of a set of Pagid Blues!! and less than one out of a set of DS2000

Old 06 June 2001, 08:15 PM
  #6  
Andy W
Scooby Regular
 
Andy W's Avatar
 
Join Date: Jul 2001
Posts: 1,887
Likes: 0
Received 0 Likes on 0 Posts
Post

I have ds 2000s on the rear
Old 07 June 2001, 01:12 AM
  #7  
Mac's Power
Scooby Regular
Thread Starter
 
Mac's Power's Avatar
 
Join Date: Nov 2000
Posts: 452
Likes: 0
Received 0 Likes on 0 Posts
Post

Where did you get them from Andy?

Paul.
Old 07 June 2001, 03:04 PM
  #8  
Podge
Scooby Newbie
 
Podge's Avatar
 
Join Date: Feb 2001
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Post

Paul,

A motorsport outlet had to source these DS2000 pads for me through a local Subaru dealer in the UK. Prodrive would not supply these directly. These pads are for the MY00 front 4 pots.

The motorsport outlet maintain that these are special Ferrodo pads available from Prodrive through your Subaru dealer only. Some other threads claim that you can get these pads elsewhere at half the price, but I'm not sure about this. I'm going with the motorsport outlet on this one.

I presume its the same story with the rear pads.

I have Mintex M1155's in the rear. These have worn very little in the last 5,000 miles, however they squeal a little in reverse. In general I'm happy with them.

I hope this helps.
Old 07 June 2001, 03:09 PM
  #9  
Mac's Power
Scooby Regular
Thread Starter
 
Mac's Power's Avatar
 
Join Date: Nov 2000
Posts: 452
Likes: 0
Received 0 Likes on 0 Posts
Post

Thanks guys. I should be able to get them then if they are a prodrive item as my supplier also is a main dealer.

Paul.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
radave
Subaru Parts
2
16 July 2016 02:19 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Brumguy34
Subaru Parts
8
04 October 2015 07:51 PM
sivo
ScoobyNet General
12
26 September 2015 12:34 PM



Quick Reply: Rear Pads?



All times are GMT +1. The time now is 11:23 PM.