Suitable 17" Rims for AP330 Kit
#1
Yes I know this has been done to death
I want to fit AP330mm disk kit to my car, and I wondered which 17" wheel was suitable. I'm sure loads of you have tried different combinations
I want to fit Khan RSR's (17") but I don't know if it'll work.
Ps I have a strong dislike of anything difficult to clean eg multispoke / split spoke type affairs This seems to rule out much of all the stuff from Scoobysport / Scoobymania. I'd prefer 5 spokes if possible.
I've stolem a friend of mines piccy of this wheel on his Cossie
I want to fit AP330mm disk kit to my car, and I wondered which 17" wheel was suitable. I'm sure loads of you have tried different combinations
I want to fit Khan RSR's (17") but I don't know if it'll work.
Ps I have a strong dislike of anything difficult to clean eg multispoke / split spoke type affairs This seems to rule out much of all the stuff from Scoobysport / Scoobymania. I'd prefer 5 spokes if possible.
I've stolem a friend of mines piccy of this wheel on his Cossie
#3
Scooby Regular
Join Date: May 2000
Location: MY00,MY01,RX-8, Alfa 147 & Focus ST :-)
Posts: 10,371
Likes: 0
Received 0 Likes
on
0 Posts
Gary
Check out the Raceline RL7s. 7 spoke design, but very easy to clean. I've got them on my car, admittedly not with AP brakes, but there does seem to be quite a lot of room behind the wheels for brake calipers to be fitted without fouling the alloys.
Chris
Check out the Raceline RL7s. 7 spoke design, but very easy to clean. I've got them on my car, admittedly not with AP brakes, but there does seem to be quite a lot of room behind the wheels for brake calipers to be fitted without fouling the alloys.
Chris
#4
Pd7s are my favourites of all the ones I've seen (ie ones that are offered by Scoobysport / Scoobymania / Prodrive). I still don't really like them though (7 spoke not 5)
I have found in some previous posts that the Khan's will fit over STI 4 pots, doesn't seem like anyone has tried them over AP's though
I like some of the wheels offered by the Aussie guys (got some links at home to their sites)
I am abviously a bit picky !
Chris
I have a couple of piccies in emails of the one's your talking about (I think!) I'll post them later to make sure.
Think I might just give it a go ...I'll be buying the wheels first (in a month or so) then the callipers at a later date .. christ knows what I'll do if it doesn't all fit.
Anyone suggest an offset that may work ? I have heard that 50-53mm is the safest range to go for but that 48 would probably be OK.
What width ? 7 or 7.5 inch ?
Gary
I have found in some previous posts that the Khan's will fit over STI 4 pots, doesn't seem like anyone has tried them over AP's though
I like some of the wheels offered by the Aussie guys (got some links at home to their sites)
I am abviously a bit picky !
Chris
I have a couple of piccies in emails of the one's your talking about (I think!) I'll post them later to make sure.
Think I might just give it a go ...I'll be buying the wheels first (in a month or so) then the callipers at a later date .. christ knows what I'll do if it doesn't all fit.
Anyone suggest an offset that may work ? I have heard that 50-53mm is the safest range to go for but that 48 would probably be OK.
What width ? 7 or 7.5 inch ?
Gary
#5
Scooby Regular
Join Date: May 2000
Location: MY00,MY01,RX-8, Alfa 147 & Focus ST :-)
Posts: 10,371
Likes: 0
Received 0 Likes
on
0 Posts
Gary, might be best to have chat with someone like Steve Lawson or Nito who know about these things than amateur duffers like me
Chris
Chris
#6
Scooby Regular
Join Date: May 2000
Location: MY00,MY01,RX-8, Alfa 147 & Focus ST :-)
Posts: 10,371
Likes: 0
Received 0 Likes
on
0 Posts
Gary
Here is a picture of the RL7 in anthracite, as fiited to my car
Chris
[This message has been edited by Chris L (edited 07 February 2001).]
Here is a picture of the RL7 in anthracite, as fiited to my car
Chris
[This message has been edited by Chris L (edited 07 February 2001).]
Thread
Thread Starter
Forum
Replies
Last Post