OZ racing decals
01 November 2000, 07:50 PM
#1
Scooby Regular
Thread Starter
Join Date: Feb 2000
Location: Potters Bar
Posts: 2,924
Likes: 0
Received 0 Likes
on
0 Posts
Can you help. I've got a set of OZ Supertourismos and the black lettering is flaking off. Any ideas where I can get these repalced. They were bouught second hand so don't know how old they are.
Grateful for any help
ALlanB
Grateful for any help
ALlanB
02 November 2000, 10:01 AM
#2
Scooby Regular
Join Date: Aug 2000
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
AllanB,
as far as my knowledge goes, you will not be able to get hold of these. The OZ racing you refer to, is painted on! I have recently dipped my OZ ST Evo's 2 anthracite, loosing the OZ print. I 2 had the same question direct to OZ. The only awnser is to make some up. I took digital photographs of the wheels before they where dipped just incase I decided to get them done. Apparently it will cost about £40 to get some made. I haven't bothered as of yet...wheel looks just as good without
!
as far as my knowledge goes, you will not be able to get hold of these. The OZ racing you refer to, is painted on! I have recently dipped my OZ ST Evo's 2 anthracite, loosing the OZ print. I 2 had the same question direct to OZ. The only awnser is to make some up. I took digital photographs of the wheels before they where dipped just incase I decided to get them done. Apparently it will cost about £40 to get some made. I haven't bothered as of yet...wheel looks just as good without
!
02 November 2000, 10:36 AM
#3
Scooby Regular
Join Date: Jan 2000
Posts: 3,055
Likes: 0
Received 0 Likes
on
0 Posts
You could speak to Stikki Pete and see whether he could make some up. Mail him at pete@graphix.co.uk or call him on 0850 472758.
As I recall, there was a fault with a large batch of these wheels and owners were able to get free replacements.
Stef.
As I recall, there was a fault with a large batch of these wheels and owners were able to get free replacements.
Stef.
03 November 2000, 05:35 PM
#4
Scooby Regular
Join Date: May 1999
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
AllanB
My wheels done the same, Glen at Revelution got me some replacements. I'm sure he got more than the eight he gave me. I havn't try'd fitting them yet, i think they will come off again though, i was going to get some proper one's made in vinyl but havn't got round to it yet. It is possible that i could get the ones i have scanned and e-mail the image to you so you could get them made.
Skip.
My wheels done the same, Glen at Revelution got me some replacements. I'm sure he got more than the eight he gave me. I havn't try'd fitting them yet, i think they will come off again though, i was going to get some proper one's made in vinyl but havn't got round to it yet. It is possible that i could get the ones i have scanned and e-mail the image to you so you could get them made.
Skip.
03 November 2000, 07:56 PM
#5
Scooby Regular
Join Date: Aug 1999
Posts: 2,232
Likes: 0
Received 0 Likes
on
0 Posts
Guys, the OZ decals are normally lacquered over after being applied. So if they are peeling away then
1) You have incorrectly manufactured rims and should seek recourse from your dealer/OZ - at least some of the purchase price back. Micheldever were selling some OZ Super Tseconds whose decals had been applied over the lacquer BUT THIS WAS REFLECTED IN THE PRICE
or
2) You are using too harsh a wheel cleaner, which, over time has eaten into the lacquer and then the decal has become exposed meaning it is coming away.......cue WaxWizard
Sunil
1) You have incorrectly manufactured rims and should seek recourse from your dealer/OZ - at least some of the purchase price back. Micheldever were selling some OZ Super Tseconds whose decals had been applied over the lacquer BUT THIS WAS REFLECTED IN THE PRICE
or
2) You are using too harsh a wheel cleaner, which, over time has eaten into the lacquer and then the decal has become exposed meaning it is coming away.......cue WaxWizard
Sunil
Thread
Thread Starter
Forum
Replies
Last Post
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM
