Fitting Pads on STi Brembos - Easy ??
#3
Scooby Regular
to take the pads out there are 2x pins across the top of the caliper........remove these together with the "anti-rattle" shim, push pistons back & remove pads,
THOROUGHLY clean the caliper of pad residue........refit new pads applying a little 'copper slip' to the rear face of each pad (NOT THE FRICTION SIDE!!!!!)........
refit shim and pins..........voila!!
alyn - asperformance.com
THOROUGHLY clean the caliper of pad residue........refit new pads applying a little 'copper slip' to the rear face of each pad (NOT THE FRICTION SIDE!!!!!)........
refit shim and pins..........voila!!
alyn - asperformance.com
#5
Scooby Regular
Thread Starter
Join Date: Jun 2000
Location: Cumbria
Posts: 606
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the replies guys
I was planning a straight forward pad swap, although i quick bleed might not be a bad idea,
My brakes have lost alot of feel recently , im hoping the new pads will restore the pedal feel
Phil G
I was planning a straight forward pad swap, although i quick bleed might not be a bad idea,
My brakes have lost alot of feel recently , im hoping the new pads will restore the pedal feel
Phil G
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Car Parts For Sale
1
18 November 2015 07:49 AM
stonejedi
Wheels And Tyres For Sale
7
21 September 2015 08:54 PM