AP 4-pot disk and pad options (and sources)
#1
Hi,
I'm running the AP 4-pot kit with 304mm cross-drilled disks and ZX pads. Unfortunatly the disks have around 2mm run-out and need to be replaced (before the pads!!! ).
I am thinking of replacing with G8-faced disks and DS2500 pads - any advice for mainly road use?. How do these compare to Pagid and other pad ranges for disk wear, roughness and noise?.
I'd appreciate any guidance on speed of service of the various AP distributors and approximate costs for these items - can't find a price for disks & pads.
Thanks,
Alex
I'm running the AP 4-pot kit with 304mm cross-drilled disks and ZX pads. Unfortunatly the disks have around 2mm run-out and need to be replaced (before the pads!!! ).
I am thinking of replacing with G8-faced disks and DS2500 pads - any advice for mainly road use?. How do these compare to Pagid and other pad ranges for disk wear, roughness and noise?.
I'd appreciate any guidance on speed of service of the various AP distributors and approximate costs for these items - can't find a price for disks & pads.
Thanks,
Alex
#3
Scooby Regular
Commercial content removed. Should you wish to advertise on here, please email webmaster@scoobynet.co.uk or see scoobyshop above.
[Edited by P20SPD - 8/27/2003 7:57:39 AM]
[Edited by P20SPD - 8/27/2003 7:57:39 AM]
#4
Scooby Regular
edited to add........already advertise on SCOOBYSHOP........
if you want prices please email me, but generally better than above........
thanks, alyn - asperformance
if you want prices please email me, but generally better than above........
thanks, alyn - asperformance
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM