Hi all, does anyone know the tracking and camber angles for the MY95..uk 2000 turbo...

Cheers

Ian

 

Somebody must know the settings for these PLZ....

 

normal road settings are parallel and -1deg. camber.......
any 'good' tracking place should have these!!
hope this helps
alyn - asperformance.com

 

cheers for that.....I am sure I have seen the Prodrive settings somewhere on the Web but I cant think where...!!

cheers

Ian

 

I got the Prodrive settings done on my car ages ago & the bit of paper says:

Front:

Caster - +3 degrees 30'
Camber - -1 degrees
Toe - 0 degrees

Rear:

Camber - -1 degree 20'
Toe - 0 degrees
Thrust Angle - 0 degrees

SAI - +15 degrees 15'
Included Angle - +14 degrees 10'
Setback - Front - -6mm
- Rear - +9mm
Track Width Diff - +25mm
Whel Base Diff - -15mm


Dunno what the last lot is but they were all on the sheet

MAFFA

 

Cheers Maffa, I will set it up as near as I can to the Prodrives set.. Thing is with the scoobys the suspension has got loads of adjustment on the car so you can get the best out of the car. If you get it right these cars are :::)))

thanks again

Ian