SS brake lines for 4 pots
26 July 2021, 07:02 PM
#1
Scooby Newbie
Thread Starter
SS brake lines for 4 pots
Hi, I have an USDM 00 GM6 (RS coupe) with the red factory Subaru 4 pots; I'm looking to replace the front SS brake lines, but I can't be certain which one to use.
The USDM RS came with the floating-style calipers, but I currently have the 2006 WRX rotors and the red 4 pots. As far as I know, the ends for the lines are all the same, but the lengths and mounting styles are different between the 2000 and 2006 models. My strut is the Prodrive WR Bilstein one: https://www.type-ra.com/wp-content/u...529_121508.jpg
Shorter length: https://centricparts.com/part-detail...&model=impreza
Longer length by about 6 inches: https://centricparts.com/part-detail...&model=impreza
Could someone shed some light on which one is the correct one I should use? Thanks!
The USDM RS came with the floating-style calipers, but I currently have the 2006 WRX rotors and the red 4 pots. As far as I know, the ends for the lines are all the same, but the lengths and mounting styles are different between the 2000 and 2006 models. My strut is the Prodrive WR Bilstein one: https://www.type-ra.com/wp-content/u...529_121508.jpg
Shorter length: https://centricparts.com/part-detail...&model=impreza
Longer length by about 6 inches: https://centricparts.com/part-detail...&model=impreza
Could someone shed some light on which one is the correct one I should use? Thanks!
27 July 2021, 08:39 AM
#2
Scooby Regular
simply use the correct hose for your chassis..........banjo fitting onto the caliper body will swap no issue and will be both the correct length and the correct fixings for your strut
The following users liked this post:
Thread
Thread Starter
Forum
Replies
Last Post