4 pot brake hoses
#1
Scooby Newbie
Thread Starter
Join Date: Nov 2018
Location: North Kent
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
4 pot brake hoses
Ive just fitted some refurbed front 4 scooby pots from godspeed onto my 2005 forester 2.5 xt SG.The brake hoses on the car are the banjo type where they go onto the caliper, my question is why do all the aftermarket stainless hoses not have the pin the locates the banjo end into the pinhole in the 4 pot caliper.The std brake hoses on the car are locked into place by two castings on the standard 2 pot caliper itself, so it cant rotate and undo itself.whereas the 4 pots have a pin on the hose which goes into a hole and stops it rotating. but the aftermarket hoses dont have this pin on the banjo.I go off road from time to time and dont want to knock the hose round and lose the brakes. Anybody know of aftermarket lines with the pin on the banjo end which fits into the hole in the caliper?Thanks Guys !
#2
Scooby Regular
Hi
I've got HEL braided brake lines on the R Sport (has aftermarket 4 pots on the front) and they were fitted with no issues.
I had to have the rears made as the car has single pot sliding calipers.
Merlin motorsport maybe able to assist with the technical issue that you have.
I hope this helps.
Andrew.
I've got HEL braided brake lines on the R Sport (has aftermarket 4 pots on the front) and they were fitted with no issues.
I had to have the rears made as the car has single pot sliding calipers.
Merlin motorsport maybe able to assist with the technical issue that you have.
I hope this helps.
Andrew.
Last edited by dark_angel; 30 November 2018 at 12:09 PM.
#3
Scooby Newbie
Thread Starter
Join Date: Nov 2018
Location: North Kent
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Hi
I've got HEL braided brake lines on the R Sport (has aftermarket 4 pots on the front) and they were fitted with no issues.
I had to have the rears made as the car has single pot sliding calipers.
Merlin motorsport maybe able to assist with the technical issue that you have.
I hope this helps.
Andrew.
I've got HEL braided brake lines on the R Sport (has aftermarket 4 pots on the front) and they were fitted with no issues.
I had to have the rears made as the car has single pot sliding calipers.
Merlin motorsport maybe able to assist with the technical issue that you have.
I hope this helps.
Andrew.
Thread
Thread Starter
Forum
Replies
Last Post
LewisScoob
Subaru Parts
2
06 June 2013 09:54 AM
Andy1899
General Technical
2
04 April 2010 02:09 PM