4 pot upgrade help
#1
Scooby Regular
Thread Starter
4 pot upgrade help
hi all,
I upgraded my 1993 impreza wrx from 2 pots to 4 pots a while back. I fitted new discs and pads and noticed brake pad over lap (about 0.5mm). I put it down to the pads at the time. the pads crumbled at the edges which I did not like but they worked ok.
ive just fitted new discs and pads again, this time a different brand from a different supplier and the overlap is even worse (about 1mm)
is this normal when upgrading?
the discs are are defo 295. I measured them.
I upgraded my 1993 impreza wrx from 2 pots to 4 pots a while back. I fitted new discs and pads and noticed brake pad over lap (about 0.5mm). I put it down to the pads at the time. the pads crumbled at the edges which I did not like but they worked ok.
ive just fitted new discs and pads again, this time a different brand from a different supplier and the overlap is even worse (about 1mm)
is this normal when upgrading?
the discs are are defo 295. I measured them.
#4
Scooby Regular
Thread Starter
hi, thanks for the reply. looks like there are two types of pad?
yes brand new spring clips and pins.
http://www.ebay.co.uk/itm/Subaru-Imp...item5aff561ffb
http://www.ebay.co.uk/itm/Subaru-Imp...item35d5a64eb0
I can take a pic of the overlap you like?
yes brand new spring clips and pins.
http://www.ebay.co.uk/itm/Subaru-Imp...item5aff561ffb
http://www.ebay.co.uk/itm/Subaru-Imp...item35d5a64eb0
I can take a pic of the overlap you like?
Last edited by dj219957; 09 November 2014 at 12:23 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM