Grudgment day extra round
Can't make this...
will be doing the one on the 12th September, then an MLR one at Silverstone 2nd October then your own scoobyshootout/handling on the 3rd...busy week-end.
Arf, what you think yours will do down the strip mate? late 10's? I finally got the gt35r on and bedded in, doing a nice 600/600.......will see how long clutch and gearbox last now

will be doing the one on the 12th September, then an MLR one at Silverstone 2nd October then your own scoobyshootout/handling on the 3rd...busy week-end.
Arf, what you think yours will do down the strip mate? late 10's? I finally got the gt35r on and bedded in, doing a nice 600/600.......will see how long clutch and gearbox last now


Trending Topics

Tim

will see what the weathers like
Tim
Yes bud, 6 speeder is a good box but weak with over 500bhp running through it, 5 speed is good box, Rich Marples run over 590bhp ATW
through his original Tommi Mak box and its still going well after lots of trackdays and sprints, his front lsd has finally gone before the box.If I did it again it would be 400/400 cap with 1st class coily's and a mega spooling turbo, this 1st gear crap on spritns gets you fed up eventually
Yes bud, 6 speeder is a good box but weak with over 500bhp running through it, 5 speed is good box, Rich Marples run over 590bhp ATW
through his original Tommi Mak box and its still going well after lots of trackdays and sprints, his front lsd has finally gone before the box.
If I did it again it would be 400/400 cap with 1st class coily's and a mega spooling turbo, this 1st gear crap on spritns gets you fed up eventually
through his original Tommi Mak box and its still going well after lots of trackdays and sprints, his front lsd has finally gone before the box.If I did it again it would be 400/400 cap with 1st class coily's and a mega spooling turbo, this 1st gear crap on spritns gets you fed up eventually

i was aiming for 400/400 on mine with a few bits mainly exhaust bits and some mr cams with a remap of the standard 6 ecu as there seems to be some good software out for them now so it should be fine for my needs
400/400 and next to no lag should make for a nice fast road car

Tim
590 atw is awesome through a standard box !!!
i was aiming for 400/400 on mine with a few bits mainly exhaust bits and some mr cams with a remap of the standard 6 ecu as there seems to be some good software out for them now so it should be fine for my needs
400/400 and next to no lag should make for a nice fast road car
Tim
i was aiming for 400/400 on mine with a few bits mainly exhaust bits and some mr cams with a remap of the standard 6 ecu as there seems to be some good software out for them now so it should be fine for my needs
400/400 and next to no lag should make for a nice fast road car

Tim
Tim it will be perfect mate, can compete with most big power cars with 400/400 IMO, fair enough on big circuits it might tell, but lets face it, nice and twisty is more fun!
Fantastic day,
drove there, did the day and drove home.
in the morning could not get the last part of the track right, got some more cone, close to getting enough for a short track now,
got to grips with the track in the afternoon, times came down, big thanks to FroSTi for helping out for the day,
but some fast fast cars there, Dax rush, some fast evos, a lot of cars braking gearboxes and diffs,
Hot hot hot as well,
some bikes doing top speed runs.
one did 187mph on the back wheel
one bike did 1 mile run at 227mph
great day.
bez
drove there, did the day and drove home.
in the morning could not get the last part of the track right, got some more cone, close to getting enough for a short track now,
got to grips with the track in the afternoon, times came down, big thanks to FroSTi for helping out for the day,
but some fast fast cars there, Dax rush, some fast evos, a lot of cars braking gearboxes and diffs,
Hot hot hot as well,
some bikes doing top speed runs.
one did 187mph on the back wheel
one bike did 1 mile run at 227mph
great day.
bez
Evo's 1-4th in shootout
1. Kenny Brookes
2. Phil Natt
3. Paul Martin or Marcus
4. Marcus or Paul Martin
It was Paul Martin in his 700bhp 6 that snapped a drive shaft and blew the rear diff, he only lives 10 mins away so within an hour he was back in business.
Is it me or are the courses getting shorter? lol few doing 30+ sec laps in practise
1. Kenny Brookes
2. Phil Natt
3. Paul Martin or Marcus
4. Marcus or Paul Martin
It was Paul Martin in his 700bhp 6 that snapped a drive shaft and blew the rear diff, he only lives 10 mins away so within an hour he was back in business.
Is it me or are the courses getting shorter? lol few doing 30+ sec laps in practise
Jimmy, Pauls evo is ace, fast car, I saw him changing his diff and going back out, nice guy too.
30+ its cars getting faster.
it was a short track.
It was a great day,
I was expecting mine been laggy, but on the tight part of the track, 2nd gear cat 5000 rpm, so when I put my boot down it was there, no lag. the cars that I normaly close to, I was still with them, but some other different driver / cars,
I stopped at 3.30 and just watched for an hour.
Some of the evos of the line were awsome,
Bez
30+ its cars getting faster.
it was a short track.
It was a great day,
I was expecting mine been laggy, but on the tight part of the track, 2nd gear cat 5000 rpm, so when I put my boot down it was there, no lag. the cars that I normaly close to, I was still with them, but some other different driver / cars,
I stopped at 3.30 and just watched for an hour.
Some of the evos of the line were awsome,
Bez
Arrrrrgggghh !!!!!

i knew i should of gone but it was either fix the car on a nice day or fix it in the rain(should've just got a bit wet and had a good day out)
glad you had fun bez and didn't break anything,always a good result if you can drive home at the end of the day.glad to see the evo's pulling their weight just a bit gutted i missed it.
paul martin thats neverneverman yes ? evolution solutions ?
Tim


i knew i should of gone but it was either fix the car on a nice day or fix it in the rain(should've just got a bit wet and had a good day out)

glad you had fun bez and didn't break anything,always a good result if you can drive home at the end of the day.glad to see the evo's pulling their weight just a bit gutted i missed it.
paul martin thats neverneverman yes ? evolution solutions ?
Tim
Arrrrrgggghh !!!!!

i knew i should of gone but it was either fix the car on a nice day or fix it in the rain(should've just got a bit wet and had a good day out)
glad you had fun bez and didn't break anything,always a good result if you can drive home at the end of the day.glad to see the evo's pulling their weight just a bit gutted i missed it.
paul martin thats neverneverman yes ? evolution solutions ?
Tim


i knew i should of gone but it was either fix the car on a nice day or fix it in the rain(should've just got a bit wet and had a good day out)

glad you had fun bez and didn't break anything,always a good result if you can drive home at the end of the day.glad to see the evo's pulling their weight just a bit gutted i missed it.
paul martin thats neverneverman yes ? evolution solutions ?
Tim
Yes mate he runs evo solutions, top bloke, very good work and reputation, also does bits and bobs for scoobs if needs be, spent a fair whack up his place in my time lol
any of you lads going to the one on the 12th? then scoob shootout + handling? shuld be good, looking forward to it.
jim yes evolution solutions,i'm waiting for some fancy droplinks to come this week i got from there then its done
for now anyway 
is the one on the 12th at elvington ?? would have a run over if it is.
wouldn't mind having a look at your motor too jim if you don't mind
Tim

is the one on the 12th at elvington ?? would have a run over if it is.
wouldn't mind having a look at your motor too jim if you don't mind
Tim
Hiya Tim, yeah its at Elvington on the 12th as far as I know mate, welcome to have a nosey mate, I have Paul's rose jointed links on the front and rear on mine, great product
Pity passenger laps arn't allowed for those wanting to pop over and watch really
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM




i could only wish for that in mine 

