Brembo mounting bolts
25 May 2012, 12:35 PM
#1
Scooby Regular
Thread Starter
iTrader: (51)
Join Date: Nov 2002
Location: MSOC
Posts: 7,439
Likes: 0
Received 0 Likes
on
0 Posts
Brembo mounting bolts
I am after a full set of Brembo mounting bolts to mount my calipers on my WRX. Must be in good condition with no cross threading.
25 May 2012, 12:57 PM
#3
Brembos will be all newage sti's 2001 to today. even hatch has same bolts I believe. These can be purchased from Subaru.
Doubt you will find cross threaded bolts as it normally pulls the alley from the caliper and leaves the bolt fine. Will need the washers too.
Doubt you will find cross threaded bolts as it normally pulls the alley from the caliper and leaves the bolt fine. Will need the washers too.
25 May 2012, 01:11 PM
#5
Scooby Regular
Thread Starter
iTrader: (51)
Join Date: Nov 2002
Location: MSOC
Posts: 7,439
Likes: 0
Received 0 Likes
on
0 Posts
For front and rear mate. I have a bugeye.
I have got a price for a set from Subaru but they are nearly £60 
I don't have any yet mate.
Brembos will be all newage sti's 2001 to today. even hatch has same bolts I believe. These can be purchased from Subaru.
Doubt you will find cross threaded bolts as it normally pulls the alley from the caliper and leaves the bolt fine. Will need the washers too.
Doubt you will find cross threaded bolts as it normally pulls the alley from the caliper and leaves the bolt fine. Will need the washers too.
I don't have any yet mate.
25 May 2012, 01:12 PM
#6
The front bolts are the same on all claipers the rear Brembo bolts are different. Cant remember the thread size but will get it for you. I assume its the rears and they are stupidly expensive from the dealer. Alyn at AS Performance will be able to get you them at a fraction of the dealer price.
Trending Topics
25 May 2012, 01:30 PM
#10
Scooby Regular
Thread Starter
iTrader: (51)
Join Date: Nov 2002
Location: MSOC
Posts: 7,439
Likes: 0
Received 0 Likes
on
0 Posts
The front bolts are the same on all claipers the rear Brembo bolts are different. Cant remember the thread size but will get it for you. I assume its the rears and they are stupidly expensive from the dealer. Alyn at AS Performance will be able to get you them at a fraction of the dealer price.
25 May 2012, 02:51 PM
#12
Scooby Regular
Thread Starter
iTrader: (51)
Join Date: Nov 2002
Location: MSOC
Posts: 7,439
Likes: 0
Received 0 Likes
on
0 Posts
The rears should be a straight fit but I will have to use larger handbrake shoes which I have already got. Pretty sure you only need the brackets for classics.
25 May 2012, 03:46 PM
#13
The front threads are M12 x 35mm with a pitch of 1.5mm . the rears are M10 x 25mm with a pitch of 1.5mm , you should be able to pick these up from any good bolt supplier
Cheers Ian
Cheers Ian
Last edited by Godspeed Brakes; 25 May 2012 at 03:49 PM.
25 May 2012, 03:48 PM
#14
The front bolts are the same on all claipers the rear Brembo bolts are different. Cant remember the thread size but will get it for you. I assume its the rears and they are stupidly expensive from the dealer. Alyn at AS Performance will be able to get you them at a fraction of the dealer price.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
