up pipe
#1
Scooby Regular
Thread Starter
Join Date: Sep 2006
Location: birmingham
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
up pipe
im in need of a up pipe for my00 classic wagon, its an import wrx turbo so if anyone knows where i can get a new one or has one in good condition pm me please im in need of it asap lol
#4
Scooby Regular
Thread Starter
Join Date: Sep 2006
Location: birmingham
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
#5
Scooby Regular
iTrader: (4)
Join Date: May 2005
Location: midlands......
Posts: 1,966
Likes: 0
Received 0 Likes
on
0 Posts
u have pm......
well you would if your box was empty ........
The uppipe is a standard item with the heat shields removed,the intention was to open the ports to match up to the ported headers and turbo i was fitting,and to wrap the pipe in lagging to keep the temp iside the pipe and not the engine bay.... but i purchased a ready made one off Harvey on here to do the job,so its been sitting in the garage with all the rest of the spares ive acumalated.... there are no gaskets,and i just used the original metal ones when i did the conversion,its normal that they can be used a couple of times before replacment is needed.... thats about it really,one of the threads is flatted slightly if i remember correctly,but you can either run a nut down it first to clean it up,or simply swap the stud over with one off your original pipe,straightforward to replace once the downpipe and headers are dropped off,will have to jack the drivers side of the engine up a tad to allow the pipe to drop out,buts its easy enough..... price wise dont know... say £30 ? im in shirley by the way
well you would if your box was empty ........
The uppipe is a standard item with the heat shields removed,the intention was to open the ports to match up to the ported headers and turbo i was fitting,and to wrap the pipe in lagging to keep the temp iside the pipe and not the engine bay.... but i purchased a ready made one off Harvey on here to do the job,so its been sitting in the garage with all the rest of the spares ive acumalated.... there are no gaskets,and i just used the original metal ones when i did the conversion,its normal that they can be used a couple of times before replacment is needed.... thats about it really,one of the threads is flatted slightly if i remember correctly,but you can either run a nut down it first to clean it up,or simply swap the stud over with one off your original pipe,straightforward to replace once the downpipe and headers are dropped off,will have to jack the drivers side of the engine up a tad to allow the pipe to drop out,buts its easy enough..... price wise dont know... say £30 ? im in shirley by the way
Last edited by rigga; 28 May 2007 at 06:00 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM