When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I might have a hub which came from my Type RA, basically identical but you would need to swop the back plates over if you have ABS fitted, I'll have a look later and mail you back.
I'm looking for a front passenger hub assembly for an RB5 (MY99)
Has anyone got one spare PLEASE!!!
Thanks in advance, Phill
Right sorry for misguiding you all. Apparently all I need is the drive shaft flange? Sorry I know nothing about what I'm trying to buy. It's shagged whatever it it. It fits inside the inside of the bearing?
That usually happens when you run too long with a knackered bearing. If the flange needs replacing, so will the bearing. You're best off replacing the whole hub, if you can find a good one.
That usually happens when you run too long with a knackered bearing. If the flange needs replacing, so will the bearing. You're best off replacing the whole hub, if you can find a good one.
Bearing been shagged for a while unknown to me. Day before I was doing 135 mph (on a private road) When we jacked it up 3 of us went white, got the video on my phone, still horrible to look at. It was so loose god knows how it stayed on. Brake only worked sometimes after a pump to the floor and press again on the pedal. Nightmare!!!
I got new bearings anyway now. A good mechanical mate of mine says the hub is fine. Just need the flange thingy
Been off the road for 6 months, so gagging to take it out again