Engine Earthing Kit
#3
Scooby Regular
don't be a lazy @rse, it's a doddle to do yourself - http://www.stefanostadal.homedns.org...ounding_points
Stefan
Stefan
#4
#5
I used Stefan's site to make up mine, wasn't that hard at all, really. Don't be such a couch-spud, Pickle
The difficult bit is getting a hole through the aircon grommet! 6mm spade bit turned by hand for the hole, then a coat hanger and washing up liquid to feed the cable to the ECU did the trick.
The difficult bit is getting a hole through the aircon grommet! 6mm spade bit turned by hand for the hole, then a coat hanger and washing up liquid to feed the cable to the ECU did the trick.
#6
Scooby Regular
Thread Starter
Join Date: Feb 2002
Location: Behind the 400BHP door :)
Posts: 1,403
Likes: 0
Received 0 Likes
on
0 Posts
Jimmy, it would have been if I could post up a reply on there!! (forgot my username/password etc..) Ps, Keith the moderator from P1woc has got in there first the cheeky get!
I would take it if he wants to sell it to me though! ??
I would take it if he wants to sell it to me though! ??
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM