Col Stone

Hi I'm after a set of the little thin black plastic mud flaps that were fitted on the P1 when it had the 18" wheels on it.
A full set would be OK but I really only want the front ones to go on my V5 type R. Can anyone help?
Cheers Col

*Sonic*

they only do the fronts and you can get them from your local Subaru Dealer, they are called Stone Protectors

Col Stone

Cheers for that! The name is the same as mine I have seen these in the dealer but I'm too tight to pay the price they want and wonder if anyone has them 2nd hand i.e they now have the STI ones on and these sat in the garage!
Cheers Col

megabusa

How much are they from the dealer? I could make you some just like them.

*Sonic*

I took a template of them when I bought mine, but havent found anywhere to get the material from to make up some

megabusa

If you would like to send me the template I can make them in top grade polyurethane, high gloss finish, any colour. Water jet cut for accuracy. If interested let me know!

SHAGGYDOG

Megabusa

Defo interested if you can get some of these made (even if just the fronts) at the right price!

I've put a post up on the P1 owners club to see who else might be interested

Can you do them in sonic blue?

cheers
Phil (00 P1)

[Edited by SHAGGYDOG - 8/31/2003 7:23:46 PM]

[Edited by SHAGGYDOG - 8/31/2003 7:26:15 PM]

*Sonic*

I only have the template on a piece of A4, keep meaning to scan it in, when I get 5 mins I'llscan it in, and email it to you

They are 10 quid each from a dealer, that makes it 20 quid for the pair

megabusa

The blue is a very good match to Sonic blue, but obviously you can't do metallic or pearlescent finishes. I can mail you a photo of the material in this colour.

*Sonic*

that would be good to see what the blue looks like

*Sonic*

And here it is

SHAGGYDOG

Megabusa

Yes please mail me a pic (if its different to the one *Sonic* has now shown) and advise cost, also whether you can do rears as well altho fronts are needed more

Also wonder whether some P1 logos (to scale of the flap) would be poss?

Thanks

Ps COl, sorry don't wanto hijack your thread but least its a free BTTT


[Edited by SHAGGYDOG - 8/31/2003 10:01:56 PM]

[Edited by SHAGGYDOG - 8/31/2003 10:02:50 PM]

megabusa

Sonic has kindly posted the picture. If rears were never available, I would be able to design and manufacture them to suit the fronts, not sure they're big enough for logos, will be able to tell once I see the template.

SHAGGYDOG

so thumbs up for the colour, just need the template then, please *Sonic*

also template needed for rears if somebody could oblige Megabusa please

please let me know when all sorted and price etc, some early interest is also being shown on P1 site making it more viable I guess or could you just do one set (I defo want one) ?

thanks

[Edited by SHAGGYDOG - 8/31/2003 10:45:39 PM]

*Sonic*

Will scan the template tomorrow (as the scanner is at my folks house)

Here is the flaps on the car


One of the reasons I took a template, was so that I could make some for the rears, I think the only thing that would be needed for the rears is the two bolt holes to be in a slightly different place to match up with the rear arch

Steve

toxwaz

scott,could u make me a set when u got this template sorted? where u at?regards.mark

SHAGGYDOG

Thanks Steve, much appreciated, so just need a price for front and rears in blue ...

Megabusa please mail me if preferred, many thanks

cheers

Phil

megabusa

i can make as many of these as there is demand. Will work out a price when I see the template, and sort out the rear pairs also. Just one thing, how do they attach? I presume they use the plastic 'u' nut with threaded insert?

Col Stone

Hi back again!
I didn't think this would cause so much interest.
Megabusa I would like a set of these for the front in blue if you are going to produce these, thank you very much.
Cheers Col

Chris Clayton

I would be interested in two sets.
A set in blue and a set in black.

Cheers

Chris

*Sonic*

Sorry guys couldnt get to my folks house tonight

so I took it to my sisters, and they dont have the scanner connected anymore !!

And I'll left the template at their house - DOH !

Im gonna have to go back there after work tomorrow to get it, I will get it scanned in

They both fit onto a sheet of A4 to give you a rough idea of size

Steve

SHAGGYDOG

no worries m8 ... the fact that you're doing it is great

so just need the price please ?

cheers

phil

megabusa

My email is shafted at the minute, cant receive at all!! Bugger. Once I get hold of the template I can work on the price and lead times, but need email first!!

*Sonic*

Sorry yet again not been able to get it scanned in as this happened

http://www.scoobynet.co.uk/bbs/threa...hreadid=246349

megabusa

My email as per my profile is still down, I can be contacted at mail@scottlowe.co.uk regarding these flaps.

Cheers.

Scratch

iTrader: (1)

OK just got some genuine ones from the dealer. They are part SACC2145, and are £8.50 each plus the dreaded VAT, so just a few pence short of £20 all in.

Unfortunately they so not fit the bugeye, but I've made a template of it, and have also marked where the holes would need to be for the bugeye (using my friends MY01).