Rotated turbo kit/injectors
#1
Scooby Regular
Thread Starter
Join Date: Aug 2016
Location: Gatwick
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Rotated turbo kit/injectors
As it says above I am looking for a rc rotated setup and a set of 1200/1300cc injectors.
Thanks
Thanks
Last edited by Mr Overboooost; 14 August 2017 at 06:40 PM.
#7
Scooby Regular
Thread Starter
Join Date: Aug 2016
Location: Gatwick
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
I am going for about 600bhp
I am using one of Owen developments custom M series turbo which is basically a modified gt35 But to my spec which is good for about 660bhp.
I am using one of Owen developments custom M series turbo which is basically a modified gt35 But to my spec which is good for about 660bhp.
Trending Topics
#8
Scooby Regular
iTrader: (59)
I have the GT30 based mspec turbo it has had a larger compressor wheel fitted so is probably more like a 32 and it made 551bhp at the wheels and 630 bhp at the flywheel. The ID2000''s would not be too big I have seen people max out 1300''s on some fuels at the power level u are looking at.
#9
Scooby Regular
Thread Starter
Join Date: Aug 2016
Location: Gatwick
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Oh I see maybe I should consider those then
Leave it with me and I will get back to you.later
What duty were the injectors running at that power
Leave it with me and I will get back to you.later
What duty were the injectors running at that power
Last edited by Mr Overboooost; 16 August 2017 at 09:29 AM.
#10
Scooby Regular
Thread Starter
Join Date: Aug 2016
Location: Gatwick
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Looks like there's to many conflicting opinions on what size to go for . From what I can see its running at optimum duty and spray pattern of the injector etc so slightly confusng .
#14
Scooby Regular
iTrader: (59)
I have heard elvis is alive. I was running around 60 ish % duty on a pure race car at 2.1 bar of boost so if it was going to cause an issue I think I would have known very quickly. Andy Forrest didn't have any issues mapping it so maybe u just need a good mapper lol I seen no knock or any other issues and with myvsyvecs I was logging everything so I would know. Maybe a post in the technical section here would help 😂
#15
Scooby Regular
Thread Starter
Join Date: Aug 2016
Location: Gatwick
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Yeh and I've heard bruce lee is still alive working in a Chinese takeaway. Well it didn't really start as technical issue but because of your most helpful comments I guess it is.
#16
Scooby Senior
iTrader: (68)
Dont really like Arch so got no reason to help his sale but I ran ID2000s for 660bhp and they idled perfectly at 1k rpm, drove smooth off boost and round town. This is was on a syvecs ecu, they only other injectors I would personally consider is ASNU ones and think they go up to 1300 or 1600s.
#18
Scooby Regular
iTrader: (59)
Thanks Banny I don't really like you either lol but appreciate the comment.
I am not really trying to push them they will sell anyway and I am not in a hurry. I was actually trying to help out by pointing out that a 1300cc injector may be marginal with that turbo especially on certain fuels. While it might not be a technical post people are actually trying to help you out. I will remove mine from the equation and leave you free to make your own choice
I am not really trying to push them they will sell anyway and I am not in a hurry. I was actually trying to help out by pointing out that a 1300cc injector may be marginal with that turbo especially on certain fuels. While it might not be a technical post people are actually trying to help you out. I will remove mine from the equation and leave you free to make your own choice
#19
Scooby Regular
Thread Starter
Join Date: Aug 2016
Location: Gatwick
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
We can't all like each other but thanks for the advice as I am still considering those anyway as I havnt made my mind up yet . Christ it took me 4 weeks to decide what turbo I wanted
So its early days yet.
So its early days yet.