Newage double or single pillar pod
Newage double or single pillar pod
Looking for a pillar pod for new age pref double but single will do.. Can't seem to find any for newage that house a 60mm gauge
Any help appreciated
Martin
Any help appreciated
Martin
Martin
I looked for a while Martin and it's the best match for the defis as far as I could find as you know I had it in the last spec-c and no problems at all, uses a Bosch sensor which are £50 as a replacement, got a spare sat here but not needed to use it yet
Last edited by The Pink Ninja; Nov 19, 2015 at 11:48 AM.
Trending Topics
Shame defi don't do a 60mm wideband gauge then isn't it...or any wideband gauge come to that...id research it before posting personally
I looked for a while Martin and it's the best match for the defis as far as I could find as you know I had it in the last spec-c and no problems at all, uses a Bosch sensor which are £50 as a replacement, got a spare sat here but not needed to use it yet
I looked for a while Martin and it's the best match for the defis as far as I could find as you know I had it in the last spec-c and no problems at all, uses a Bosch sensor which are £50 as a replacement, got a spare sat here but not needed to use it yet
I'm going to order thishttp://www.ebay.co.uk/ulk/itm/121183799070
And a single pod for now from Scoobyworld... Pm me re the Bosch sensor if it's better then the one they supply I'll take it off your hands
Where did you wire the gauge mate?
Martin
Scooby Regular
Joined: Oct 2014
Posts: 6,082
Likes: 131
From: P1234x
[QUOTE=The Pink Ninja;11762548]Shame defi don't do a 60mm wideband gauge then isn't it...or any wideband gauge come to that...id research it before posting
Not me who wants one pal if I needed one I would have made the effort in researching etc, and I posted what I thought and felt at the time you could have put it better and not like some smart **** know it all telling me what to post
Not me who wants one pal if I needed one I would have made the effort in researching etc, and I posted what I thought and felt at the time you could have put it better and not like some smart **** know it all telling me what to post
[QUOTE=ZANY;11762566]
Sorry guys should of made this clear, the lc-1 is 52mm and the defi gauge will be a 60mm thing is you can't get a pod to house both so question was will the 52mm have to be opened to house the 60mm defi gauge... The lc-1 will ft straight in I know that 
just didt like the idea of butchering the pod 
Martin
Shame defi don't do a 60mm wideband gauge then isn't it...or any wideband gauge come to that...id research it before posting
Not me who wants one pal if I needed one I would have made the effort in researching etc, and I posted what I thought and felt at the time you could have put it better and not like some smart **** know it all telling me what to post
Not me who wants one pal if I needed one I would have made the effort in researching etc, and I posted what I thought and felt at the time you could have put it better and not like some smart **** know it all telling me what to post
just didt like the idea of butchering the pod Martin
Your set up is what I'm replicating gaz I'm going to order this
http://www.ebay.co.uk/ulk/itm/121183799070
And a single pod for now from Scoobyworld... Pm me re the Bosch sensor if it's better then the one they supply I'll take it off your hands
Where did you wire the gauge mate?
Martin
I'm going to order thishttp://www.ebay.co.uk/ulk/itm/121183799070
And a single pod for now from Scoobyworld... Pm me re the Bosch sensor if it's better then the one they supply I'll take it off your hands
Where did you wire the gauge mate?
Martin
Now you're asking
...the wiring was done a couple of years ago now in the back of the pillar as made a little loom as mine is a complete A pillar with the cups moulded in so it was easier to put a connector block between the two so I could remove it without messing with the wires, daisy chaining the defi of the other 3 and wiring it nice and tidy took about an hour when I put them in this but can't for the life of me remember what's what without looking...as there is the calibration button and little LED too, one thing I wouldn't do is take the same live as the defis as I did this at first and my controller went a few weeks later, Don't know if it was coincidence or not but saves another £100 If I get a minute over the weekend I'll have a look 😉
Last edited by The Pink Ninja; Nov 19, 2015 at 07:17 PM.
The sensor is the same as far as I know, I bought another one from the states when I was flicking through eBay one night as they were cheaper just incase I had any problems
Now you're asking ...the wiring was done a couple of years ago now in the back of the pillar as made a little loom as mine is a complete A pillar with the cups moulded in so it was easier to put a connector block between the two so I could remove it without messing with the wires, daisy chaining the defi of the other 3 and wiring it nice and tidy took about an hour when I put them in this but can't for the life of me remember what's what without looking...as there is the calibration button and little LED too, one thing I wouldn't do is take the same live as the defis as I did this at first and my controller went a few weeks later, Don't know if it was coincidence or not but saves another £100
If I get a minute over the weekend I'll have a look 😉
Now you're asking
...the wiring was done a couple of years ago now in the back of the pillar as made a little loom as mine is a complete A pillar with the cups moulded in so it was easier to put a connector block between the two so I could remove it without messing with the wires, daisy chaining the defi of the other 3 and wiring it nice and tidy took about an hour when I put them in this but can't for the life of me remember what's what without looking...as there is the calibration button and little LED too, one thing I wouldn't do is take the same live as the defis as I did this at first and my controller went a few weeks later, Don't know if it was coincidence or not but saves another £100 If I get a minute over the weekend I'll have a look 😉
Cool I'll go with the sensor they provide then... Just hoping drilling a new hole in the down pipe won't be a pita
If you could take a look that would be great mate
Martin
Thread
Thread Starter
Forum
Replies
Last Post
scottydouk
Subaru Parts
2
Dec 1, 2015 11:27 PM