When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2 litre Sti 3 heads ,gt spec headers , Hs up pipe , lateral reflowed injectors , fmic , full exhaust
355 ft lb
Will be removed by Sd motorsport in few weeks but should be sweet was inspected at start of sprint season in jan.
Sc40 billet here mate coming off in few weeks run 431 bhp on meth and 402 on v power. Mapped by si jolly green monster.
Done around 3k £550
Originally Posted by sonic93
2 litre Sti 3 heads ,gt spec headers , Hs up pipe , lateral reflowed injectors , fmic , full exhaust
355 ft lb
Will be removed by Sd motorsport in few weeks but should be sweet was inspected at start of sprint season in jan.
Could be interested in this, give me a shout when you've taken it off if other guy dosent want it.
P.s what cc did you have injectors flowed to? To get 402hp on v power?
Could be interested in this, give me a shout when you've taken it off if other guy dosent want it.
P.s what cc did you have injectors flowed to? To get 402hp on v power?
Hi sonic
Think I'll hold out for a 18g been advised that's more suited to my needs, it's all yours if u like busta
What he means is that from the first map at 380 he had the lateral reflowed injectors fitted and for each power increase, the mapper scaled the fuelling map to suit
I get that banny, but what I wanted to know is, what cc were the injectors at to get his 402hp figure as in post 2 without the meth?
900cc, each map will just alter the injector duty percentage required to provide adequate fuelling simples really. So he would need to ask his mapper what percentage his 900cc injectors were running at the time of that map, and you could roughly work out what cc they were running
900cc, each map will just alter the injector duty percentage required to provide adequate fuelling simples really. So he would need to ask his mapper what percentage his 900cc injectors were running at the time of that map, and you could roughly work out what cc they were running
Ah I see now, when he said lateral flow then upto 900cc, I thought he was just telling me that, not that what he had done (or maybe I read it wrong).
So he may of been running them anywhere around 6-700 cc you reckon?
But he dosent actually know this as that's all I wanted to know.
Last edited by bustaMOVEs; 12 October 2014 at 09:49 PM.
Again that's down to injector duty rather than cc the cc is the same. Them injectors have been in my car from 380 bhp all the way to 550+ bhp in si jgm s old car. But no duty I have no idea, till simon says rob we got a prob then I mayb ask.
If you wanting to know what cc injector needed for a gt30? Lateral reflowed items will be fine and will support more.
Again that's down to injector duty rather than cc the cc is the same. Them injectors have been in my car from 380 bhp all the way to 550+ bhp in si jgm s old car. But no duty I have no idea, till simon says rob we got a prob then I mayb ask.
If you wanting to know what cc injector needed for a gt30? Lateral reflowed items will be fine and will support more.
I don't think you can flow 95 WRX side feeds? So will have to go top feed conversion.