New member with a project
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2009
Location: cardiff
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
New member with a project
Hi all
just thought i would say hello and show u a little project i have on the go.
i recently brought this 99 wrx of a fellow scoobynet member (Apac)
The car was surprisingly a cat c write off
I will be doing the panel work my self and one of my work colleagues will do the paint work as i work in a bodyshop
here are some photos of the progress so far
The 1/4 panel was cut and drilled off, then the inner arch was given a little pull back into position
to cut the cost of buying a new door and 1/4 panel another shell was brought with running gear and door's but no engine and damaged on the n/s. i was able to to remove o/s 1/4 panel and the door a fit to my car
Will be going into work tomorrow to repair the bumper then hopefully get some primer on it monday or tuesday. i am on the look out for a o/s rear light and a fuel cap also need a wheel same as gold one's in photo and any help would be much appreciated
just thought i would say hello and show u a little project i have on the go.
i recently brought this 99 wrx of a fellow scoobynet member (Apac)
The car was surprisingly a cat c write off
I will be doing the panel work my self and one of my work colleagues will do the paint work as i work in a bodyshop
here are some photos of the progress so far
The 1/4 panel was cut and drilled off, then the inner arch was given a little pull back into position
to cut the cost of buying a new door and 1/4 panel another shell was brought with running gear and door's but no engine and damaged on the n/s. i was able to to remove o/s 1/4 panel and the door a fit to my car
Will be going into work tomorrow to repair the bumper then hopefully get some primer on it monday or tuesday. i am on the look out for a o/s rear light and a fuel cap also need a wheel same as gold one's in photo and any help would be much appreciated
Last edited by madbeater; 02 May 2009 at 06:10 PM.
#6
Scooby Regular
iTrader: (4)
Join Date: Mar 2007
Location: SWANSEA/BRIDGEND
Posts: 3,784
Likes: 0
Received 0 Likes
on
0 Posts
Never seen so much filler in a new panel, Hope you pulled it before you cut the i/4 off, anyway welcome and prepare to be skint
Last edited by Black-Hawk; 26 April 2009 at 11:34 AM.
Trending Topics
#8
Scooby Regular
iTrader: (2)
well done Justin. it puts a sad feeling in my gut to see the old girl. But she is in the right hands now. i'm still scoobless and am chasing Type-R's and Type RA's up and down the country without success as yet. It pains me to think the amount of money i chucked at that car over the past 4 years. You've certainly picked a good un! once the body has been repaired you are good to go. all consumables have been replaced and all problems relating to a scooby of this age has been taken care of. big servicing all done. performance clutch. calipers re-coned etc etc..
i just hope the day will come when we pull up at the lights together when i've sourced my new scooby
good luck with the rest of the work. i'll pop down to the workshop soon
oh, and don't forget about the exhaust etc...
Andrew
i just hope the day will come when we pull up at the lights together when i've sourced my new scooby
good luck with the rest of the work. i'll pop down to the workshop soon
oh, and don't forget about the exhaust etc...
Andrew
#10
Scooby Regular
Join Date: Nov 2008
Location: A4069
Posts: 2,060
Likes: 0
Received 0 Likes
on
0 Posts
Hello and welcome to the forum. You'll find a great group of guys on here so those parts your after should turn up. Keep up the hard work mate and hopfully see you at one of the meets
Dylan
Dylan
#15
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2009
Location: cardiff
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the warm welcome guy's!
still looking for a gold wheel same as the one in the photo above.also need a petrol flap if any one can help feel free to pm me.
I managed to make a start on the bumper today
as you can see it is split quite badley
I used some peices of steel and counter sunk rivets to brace bumper back in correct possition like so
I then plastic welded both inside and outside the bumper
just needs a light skim of stopper then primer.
still looking for a gold wheel same as the one in the photo above.also need a petrol flap if any one can help feel free to pm me.
I managed to make a start on the bumper today
as you can see it is split quite badley
I used some peices of steel and counter sunk rivets to brace bumper back in correct possition like so
I then plastic welded both inside and outside the bumper
just needs a light skim of stopper then primer.
#17
Scooby Regular
iTrader: (12)
Join Date: Mar 2009
Location: in a house
Posts: 2,078
Likes: 0
Received 0 Likes
on
0 Posts
this was down at alex's garage wasnt it?? i think i remember seeing this sitting there. seen it around and it sounded lovely.
keep up the good work mate. im sure you will have it back to its former glory
keep up the good work mate. im sure you will have it back to its former glory
#22
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2009
Location: cardiff
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Gettin there
I managed to get some color on it yesterday,started building it back up today. Won't be long now!
Sorry about the poor quality of the photo's, i only have crappy phone camera
Sorry about the poor quality of the photo's, i only have crappy phone camera