anyone got a 1994 wrx std g/box going cheap????
20 March 2009, 11:24 PM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Dec 2002
Location: just about to jump off the wardrobe...
Posts: 4,878
Likes: 0
Received 0 Likes
on
0 Posts
anyone got a 1994 wrx std g/box going cheap????
i finaly got the engine out ( thanks to daz an mattscooby)
but before matt helped me out we tryed splitting the box but it wouldnt shift
(didnt know about the bloody big bar the clutch arm piviots on had to come out)
anyway we were a bit heavy handed and the ally cast has split
need it asap will collect as long as its not when the rugbys on lol.......
but before matt helped me out we tryed splitting the box but it wouldnt shift
(didnt know about the bloody big bar the clutch arm piviots on had to come out)
anyway we were a bit heavy handed and the ally cast has split
need it asap will collect as long as its not when the rugbys on lol.......
21 March 2009, 12:28 PM
#4
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Dec 2002
Location: just about to jump off the wardrobe...
Posts: 4,878
Likes: 0
Received 0 Likes
on
0 Posts
im just going down to take a pic now fella will post it later
its totaly u/s tough its come away all the way to where the bar sits up against the allen key bolt another good yank an it prob would have come away without doing what you said to do
i off on hols tuesday an wanted it running by then but its eather buy another box an not have much spending money or wait an see what comes up,
mike what you want for it fella an where can i pick it up
will start taking the box out soon so will let you know later cheers.
its totaly u/s tough its come away all the way to where the bar sits up against the allen key bolt another good yank an it prob would have come away without doing what you said to do
i off on hols tuesday an wanted it running by then but its eather buy another box an not have much spending money or wait an see what comes up,
mike what you want for it fella an where can i pick it up
will start taking the box out soon so will let you know later cheers.
21 March 2009, 11:29 PM
#7
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Dec 2002
Location: just about to jump off the wardrobe...
Posts: 4,878
Likes: 0
Received 0 Likes
on
0 Posts
got myself sumut shiney for under the new engine to .................
arr stupid photobucket wont change the image
arr stupid photobucket wont change the image
Last edited by L55 REP; 21 March 2009 at 11:35 PM.
Trending Topics
22 March 2009, 12:28 AM
#15
Scooby Senior
iTrader: (12)
Join Date: Apr 2006
Location: south wales rhondda
Posts: 4,067
Likes: 0
Received 0 Likes
on
0 Posts
i did think there was something wrong with it a year ago as there was a vibration when i took my foot off the gas and slowed down in a gear but it was down to my mounts in my opinion as they have had their days
it changes gears fine and always run it on one of the best gear oils ( silkolien)to be honest if i was you i would see if you could get a ty54 box as it would be better and last longer than the old ty52 box if you are going to modd it abit
but it will be here if you want it
22 March 2009, 09:18 AM
#18
You need to wrap them Gareth they produce far to much heat not to be, and you need to wrap the up and down pipe on the exhaust buddy. I can't remember now the figures produced under there temp wise but it is an eye opening amount. My advise is to wrap them G
22 March 2009, 10:08 AM
#19
Scooby Senior
iTrader: (12)
Join Date: Apr 2006
Location: south wales rhondda
Posts: 4,067
Likes: 0
Received 0 Likes
on
0 Posts
but this can cause some problems down the line as it keeps the heat in and tends to make the welds or headers crack after awhile 
my mate makes exhausts for a living and dose alot with rallying and he also said when i asked about this that they don't wrap their exhausts anymore
i suppose if your in traffic alot tho it will benefit tho
22 March 2009, 05:13 PM
#23
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Dec 2002
Location: just about to jump off the wardrobe...
Posts: 4,878
Likes: 0
Received 0 Likes
on
0 Posts
ok fitting the turbo to the new engine and the water pipes from the block to the turbo are in diferent places ive moved them but the ones to long now and the other one fouls to oil feed pipe........
do i cut the metal water feed pipe fitted to the turbo (at least its easyer to change if need be,,,,,,,,
and do i bend the other pipe so not to foul the oil feed pipe............
and how come there different????? i thought all ej20 turbo engines were the same,,,,,
also im not to up on turbos but have seen tdo5's for sale saying there better than the std ones ??? is this true cos i just cleaned my turbo up ( well sarah did lol ) and it says TD05H on it
do i cut the metal water feed pipe fitted to the turbo (at least its easyer to change if need be,,,,,,,,
and do i bend the other pipe so not to foul the oil feed pipe............
and how come there different????? i thought all ej20 turbo engines were the same,,,,,
also im not to up on turbos but have seen tdo5's for sale saying there better than the std ones ??? is this true cos i just cleaned my turbo up ( well sarah did lol ) and it says TD05H on it
24 March 2009, 10:36 PM
#24
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Dec 2002
Location: just about to jump off the wardrobe...
Posts: 4,878
Likes: 0
Received 0 Likes
on
0 Posts
anyone got any advice on the turbo front????
also my roof vent turned up
mmmmm im in love lol
im away for 2 weeks now guys so if another roof vent comes up for sall will someone grab it for me and also a set of replica 94/95 wrc mirrors they have to be the exact copy but if you get them i WILL buy them as soon as i get back
cheers guys
also my roof vent turned up
mmmmm im in love lol im away for 2 weeks now guys so if another roof vent comes up for sall will someone grab it for me and also a set of replica 94/95 wrc mirrors they have to be the exact copy but if you get them i WILL buy them as soon as i get back
cheers guys
Thread
Thread Starter
Forum
Replies
Last Post