ECUTek 800cc Injector Kit 02+ £549.99
#1
ECUTek 800cc Injector Kit 02+ £549.99
We are pleased to announce that we now have available an 800cc injector kit for the 2002 onward Subaru Impreza.
During product development, results showed that the standard injectors ran out of delivery capacity at around 375BHP. EcuTek have extensively tested these injectors from power outputs from 450BHP to over 600BHP and there is still capacity to spare
These injectors are a perfect fit, with the injection nozzle protruding into the inlet manifold in exactly the same position as the standard injectors. Other aftermarket injectors either impede airflow by protruding too far into the intake, or release fuel into the injector housing, resulting in decreased airflow or poor fuel metering.
Due to their position and design, these injectors produce significantly better fuel atomisation than any other high flow injector, providing you with better fuel consumption, and combined with their excellent distribution at low flow rates, mean there are none of the usual problems at idle and slow running.
They come as a complete kit with everything needed for an easy fit, including the following:
4 High flow matched fuel injectors
4 Injector body to fuel rail adapters
4 Wiring harness adapters
4 Injector retaining clips
4 Fuel rail spacers
Detailed fitting instructions
Calibration of the injectors is as simple as making one change to the Injector Scaling map using EcuTek software.
The kit fits ALL Subaru Impreza models from 2002 onwards except US STI 2004/2005MY, which uses a different 'Side Feed' injector design
Shop Link: http://www.carbenfibrecreations.co.u...roller=product
Photo
During product development, results showed that the standard injectors ran out of delivery capacity at around 375BHP. EcuTek have extensively tested these injectors from power outputs from 450BHP to over 600BHP and there is still capacity to spare
These injectors are a perfect fit, with the injection nozzle protruding into the inlet manifold in exactly the same position as the standard injectors. Other aftermarket injectors either impede airflow by protruding too far into the intake, or release fuel into the injector housing, resulting in decreased airflow or poor fuel metering.
Due to their position and design, these injectors produce significantly better fuel atomisation than any other high flow injector, providing you with better fuel consumption, and combined with their excellent distribution at low flow rates, mean there are none of the usual problems at idle and slow running.
They come as a complete kit with everything needed for an easy fit, including the following:
4 High flow matched fuel injectors
4 Injector body to fuel rail adapters
4 Wiring harness adapters
4 Injector retaining clips
4 Fuel rail spacers
Detailed fitting instructions
Calibration of the injectors is as simple as making one change to the Injector Scaling map using EcuTek software.
The kit fits ALL Subaru Impreza models from 2002 onwards except US STI 2004/2005MY, which uses a different 'Side Feed' injector design
Shop Link: http://www.carbenfibrecreations.co.u...roller=product
Photo
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM