Flange adaptors to retain existing BOV New Age £26.50.
Flange adaptors to retain existing BOV MY 99-00 £26.50.







TMIC blanking plates to delete BOV New Age £15.00.
TMIC blanking plates to delete BOV MY 99-00 £15.00.
Plugs £8.00 each.
Additional hard pipe joiner and two clamps £13.50.
Postage £8.50
ACT guage to monitor air charge £87.50 posted.
Full compliment of intercooler kit spares including hard pipes and cores in stock for existing customers.

harveysmith1@btopenworld.com

 

BTTT.///

 

what is the advantage of deleting bov harvey plz

 

I don't advocate deleting the BOV but it appears to be the latest fad.
Advantages?
On lift off or gear change you make a different noise more akin to a rally car if that is an advantage.
If the existing BOV is not performing satisfactorily you eliminate a problem area.

If you are going to delete the BOV the turbo has to be relatively tough because the air that would normally have been released by the BOV will now reverse momentarily to the turbo.

 

harvey is it a case of taking it off and thats it?(or remap etc)
got a billet sc46 (is that tough)

 

Are you running a vent to atmosphere or recirculating D.V. Then I will tell you the exact parts required. What front mount? (I assume)
And yes the SC46 is relatively hardy. Check with Kev @ ScoobyClinic however that he is happy for you to run with no DV before you do it.

 

yes hks bov at the mo ..... Fmic from kev
bov on hard pipework direct fit

 

Without a photograph this is getting messy. I assume your hard pipe to the throttle body has an aluminium spiggot about 36 diameter. If you have a silicon joiner on that all you need is a plug which I can supply. If you do not have the silicon joiner I can supply that too.
If you want to be absolutely sure send a photo to harveysmith1@btopenworld.com

 

ok mate il try tonight

 

BTTT.///

 

there you go mate .... finally
mick

 

So from what I can see it is a triangular shape for a New Age. OK ?

 

yes mate ... thats correct i think

 

Btttt:////

 

bttt.///

 

Harvey, can you assist with some parts I require for mounting an APS DR 525 FMIC?

I have a list of what I require, you many not have the APS part but I wonder if you have alternatives that I can use.

 

Hi Harvey I have a HDI FMIC ready to fit on my classic 95 sti, but the kit is missing the bummer screws and i have know idea what DV i need to fit with it, are you able to assist with the screws aND DV??

cheers

DAve

 

Bumper screws. Send me a stamped addressed envelope and I will send them out. Subject to what dump valve you go for you will not need a flange adaptor. Something like a Forge VTA for STi 3/4 and you don't need any adaptor.
Cannon Fodder: Hi. You have an email.

 

ok thanks Havrvey i will send that to you.

 

forgot to ask Harvey whats your address??

 

Hi Harvey do you supply and fit the front mount,I have top intercooler at moment but looking to get front mount fitted if so what price we looking at thanks

 

Cheers Dave.
Yes. Fixed price fitting on the FMICs I supply. £185.
Price depends on which one you want.

 

Thanks Harvey for your help and bearing with me.

 

bttt.///

 

hi Harvey,
I need 2 blanking plugs and a hardpipe joiner, would I be right in thinking that is the requirement to blank off the recirc pipe from the OE recirc valve ( newage/blobeye ) and cap the spigot on the IC pipe? Also I have a VF35, would that be man enough to do this? This would be temporary until I can afford a DV.
Cheers, Tim.
Another thing is do you accept paypal?

 

Two blanking plugs and a silicon joiner with postage £27.50.
You need 3 jubilee clips. £1 if you don't have them.
Alternatively I can do you a Forge VTA BOV for £105 posted.
Paypal - harveysmith1@btopenworld.com

 

You have funds, cheers.

 

We have funds thankyou and we are ready to address the delivery.
Where do we send it or do we just give it to Santa Claus???

 

YHPM

 

Any chance you can do a final pipe to throttle body with a boss for IAT sensor (I have the sensor)? For a 2002 Bug with the HDI FMIC.