Alan Jeffery

Now available with the Nitrided 2.5 crank, forged rods and pistons, Cosworth engine bearings, short block ready to fit. £2150 inc vat.

SMA01 - black scoob

no buy 1 get 1 free deals alan?could take 1 for the new car too

Alan Jeffery

BOGOF !

BIG FUD

iTrader: (84)

What power and trq will these hold with ver 3 sti heads attached ?

Alan Jeffery

We are seeing 500 plus with Martyn's car. I can't see any reason why you shouldn't see a lot more with a larger turbo, particularly with a CDB build.

SMA01 - black scoob

SMA01 - black scoob

might not be too long til we find out

TH3_5T1G

iTrader: (15)

Hi Alan,
Have been mighty tempted each time i've seen a post about this, specially when associated with the s206...
Anyways, i'm digressing.
I've currently got an sti 8, how much for a 2.1 build with my v8 heads and cams etc?
And how much power would you think i'd be looking at with this setup plus the s206?
Cheers,
Tom

SMA01 - black scoob

there are so many options mate your best bet would be to phone alan and have a chat, he is very helpful and the service is first class, hence the reason my car has travelled all the way down to plymouth from central scotland to have the work carried out by them....

my car is a version 8 sti also, hopefully in the not too distant future it will all be done and dusted, im happy enough for alan to post the results and details here once it has been done, although the turbo ive gone for is different to the 1 u r mentioning

scott

Alan Jeffery

Hi Tom - As Scott says, it would be worthy of a chat! plenty to talk about.
We are seeing 505 bhp from our demo car with standard V5 heads, so we should match that easily with your Sti 8!
If you'd like to discuss it, just call me on 01752 345880 office hours or Saturday mornings..

jd5217

You could at least wait a couple of days.

SMA01 - black scoob

will try my best, i keep telling myself that i am not going to modify the new car, but i cant see that happening

stuarted

Is this a limited offer Alan?

jd5217

Probably already bought something for it.

SMA01 - black scoob

how did you guess??set of 550cc injectors and a fpr being fitted tomorrow night in time for a visit from andy f on wed morning

Alan Jeffery

We'll hang onto that price as long as possible.

MartynJ

Bttt

Alan Jeffery

We are still offering these at the same price, that's £2150 inc vat including the nitrided crank. No machining or building to do, just sort your heads out, or we'll do it for you, and bolt them on! We can supply everything else you need, all with a discount.

Here's one ready to go!

Saint AAI

So does this price include the block then or do you need to supply one? If its included, how much extra for a CDB?
Regards, Shane.

jd5217

stop teasing Alan.

bignath4607

iTrader: (11)

how much for the one same as picture but without turbo and leads etc cheers

carpboy

iTrader: (2)

Just taken my ra heads of my old block and have a stripped down cdb ready to be taken to alan next week

Alan Jeffery

The price is based on your block. I'm constantly on the look out for CDB's, the price depends on what I have to pay. If you find one, we'll build it using that. We'd say a semi closed deck block runs a very close second, if you're after 450 bhp or so.

Alan Jeffery

Depends on spec! Variables are head work, choices of stud kits, oil pumps, gaskets, belts etc.. whatever you choose we apply the same build standards.

Alan Jeffery

Advance friend and welcome..

wayner845

iTrader: (2)

Is this kit suited to my 2003 uk sti

Alan Jeffery

It isn't strictly a kit, more a finished item, but yes, we've used this conversion on new age STi's and it works a treat!

wayner845

iTrader: (2)

how does it work ,do i supply the engine or the car

Alan Jeffery

We can do it whichever way suits you! We can do a full drive in drive out using any component choice that takes your fancy. Feel free to call us if you'd like a chat about it. 01752 345880 office hours or Saturday mornings until 2.00.

SMA01 - black scoob

can verify this too....looks the dogs danglies in a newage sti