When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
We can offer replacement discs and bells for the Pro R Alcon 343mm kit , the Alcon bells have issue's with them crumbling around the outer diameter , and we have seen them do this after only a couple of years ,
It's not a very good design how the floating bobbin is fitted into the bell , it leaves a very thin wall on the outer radius on the bell , and with a reaction between the aluminium and steel , made worse because of the type of alloy used , it corrodes until it crumbles away ,
We can supply new bells made to the exact dimensions as the Alcon bells , but with a better suitable alloy , or if you are needing discs we have made them so they are bolted like many other disc makes , with 6mm bolts.
We are offering our discs and bells , bolted together ready to fit for £650 a pair including vat , which is a big saving over the Alcon ones , the discs can be supplied with 6 curved grooves or our G hook design.
We can also offer replacement 343mm x 32mm grooved discs , to fit the standard Alcon bells if needed , as well as just replacement bells for the Alcon floating bobbings.
Can ship anywhere , £10 for mainland UK , £15 for highlands , £20 to N & S Ireland , anywhere else ask for a shipping quote
I have alcon ( not pro R) 343 x32 and used for 3500 miles and 6 track days with proper heating up and cooling down but the discs have deteriorted with many cracks @Godspeed the bells seem ok and differ to the ones posted above
Ian what would you reccomend? do you have also the seals for the pistons car97, thanks
I have alcon ( not pro R) 343 x32 and used for 3500 miles and 6 track days with proper heating up and cooling down but the discs have deteriorted with many cracks @Godspeed the bells seem ok and differ to the ones posted above
Ian what would you reccomend? do you have also the seals for the pistons car97, thanks
Hi
Unfortunately with good pads and track days , your discs will crack and heat craze like that , all discs do it , might be worth looking into fitting cool air ducting on your car to keep the discs cooler on the track , that would help.
The bells you have are the same as the ones we have here
Your bells are looking fine so nothing to worry about there yet.
When you need new discs we can do them for you , a lot cheaper than Alcon's as well , we can supply you discs to fit your bells for £350 a pair.
Your discs still have life left in them , just keep an eye on them , if you get cracks over halfway across the face of the disc , you would need to change them
Hi
Unfortunately with good pads and track days , your discs will crack and heat craze like that , all discs do it , might be worth looking into fitting cool air ducting on your car to keep the discs cooler on the track , that would help.
The bells you have are the same as the ones we have here
Your bells are looking fine so nothing to worry about there yet.
When you need new discs we can do them for you , a lot cheaper than Alcon's as well , we can supply you discs to fit your bells for £350 a pair.
Your discs still have life left in them , just keep an eye on them , if you get cracks over halfway across the face of the disc , you would need to change them
18 October 2017, 04:07 PM
Pro R Alcon replacement 343mm discs and bells
