Pro R Alcon replacement 343mm discs and bells
 

We can offer replacement discs and bells for the Pro R Alcon 343mm kit , the Alcon bells have issue's with them crumbling around the outer diameter , and we have seen them do this after only a couple of years ,

http://img.photobucket.com/albums/v1...psxiinwand.jpg

http://img.photobucket.com/albums/v1...psqjoi2m15.jpg

http://img.photobucket.com/albums/v1...pstzgkmsjv.jpg

It's not a very good design how the floating bobbin is fitted into the bell , it leaves a very thin wall on the outer radius on the bell , and with a reaction between the aluminium and steel , made worse because of the type of alloy used , it corrodes until it crumbles away ,

We can supply new bells made to the exact dimensions as the Alcon bells , but with a better suitable alloy , or if you are needing discs we have made them so they are bolted like many other disc makes , with 6mm bolts.

http://img.photobucket.com/albums/v1...psr61ludkw.jpg

http://img.photobucket.com/albums/v1...psbbiyvywf.jpg

http://img.photobucket.com/albums/v1...psnieejbof.jpg

We are offering our discs and bells , bolted together ready to fit for £650 a pair including vat , which is a big saving over the Alcon ones , the discs can be supplied with 6 curved grooves or our G hook design.

We can also offer replacement 343mm x 32mm grooved discs , to fit the standard Alcon bells if needed , as well as just replacement bells for the Alcon floating bobbings.

Can ship anywhere , £10 for mainland UK , £15 for highlands , £20 to N & S Ireland , anywhere else ask for a shipping quote

Cheers Ian
01656 723060
ian@godspeedbrakes.co.uk

Great stuff.

Alcons seem to be prone to corrosion, I saw a pair of prodrive callipers that looked like a crunchy bar.

I have alcon ( not pro R) 343 x32 and used for 3500 miles and 6 track days with proper heating up and cooling down but the discs have deteriorted with many cracks @Godspeed the bells seem ok and differ to the ones posted above
https://cimg0.ibsrv.net/gimg/www.sco...1d8ad41679.jpg
Ian what would you reccomend? do you have also the seals for the pistons car97, thanks

https://cimg1.ibsrv.net/gimg/www.sco...9b04cebc8b.jpg

https://cimg3.ibsrv.net/gimg/www.sco...a2dacf48c5.jpg

Hi
Unfortunately with good pads and track days , your discs will crack and heat craze like that , all discs do it , might be worth looking into fitting cool air ducting on your car to keep the discs cooler on the track , that would help.

The bells you have are the same as the ones we have here

http://img.photobucket.com/albums/v1...pssdq0vml3.jpg


Your bells are looking fine so nothing to worry about there yet.

When you need new discs we can do them for you , a lot cheaper than Alcon's as well , we can supply you discs to fit your bells for £350 a pair.

Your discs still have life left in them , just keep an eye on them , if you get cracks over halfway across the face of the disc , you would need to change them

Cheers Ian

Hi Ian I have sent you a PM....