Hi, after reading various threads about these I have decided to buy a set to replace the knackered bilstein shocks on my car.

Does anyone know the part numbers and a supplier for these?

There for a 99 uk turbo 2000.

Tried buypartsby and they only show the fronts available.

cheers.

 

tried Camskill?

 

Are they the Bilsteins from the WR sports package?

Pictures of my Bilstein struts in this thread

https://www.scoobynet.com/suspension...uspension.html

If so then you can get them refurbed by Bilstein (obviously depending on what is wrong with them)

Address in this thread

https://www.scoobynet.com/suspension...s-rebuild.html

 

scoobyclinic are kyb suppliers

 

Thanks for the replies, Yes my dampers are the same as yours mate. Ideally I would like to get them refurbed but will replace them with the kyb's and send all of them off when I have more spare cash. Car is my daily as well so ideally need at back on the road as soon as possible.

If anyones interested camskill want £611.95 link here -

http://www.camskill.co.uk/m10b911s26...2000_Import%29

I managed to source a set direct from KYB through buypartsby for £365 delivered. On there website the rears are not listed and the price for the fronts is wrong also.

Part numbers are:

734006 - front right
734007 - front left
733010 - rear right
733011 - rear left

0115 9647 391 - buypartsby phone number.

There system wont bring the parts up using the registration only on the above part numbers. they work out at £89ish each and a fiver or so delivery.

 

Thanks mate, I did see that. hunted around for a better price and got lucky.

 

be carefull what you get for your money, most palces do performance packs like shocks, srpings, roll bars and fitting for x amount, tends to make things cheaper

dont forget the camskill price still needs fitting and setting up

 

Thanks mate, Ive checked and double checked that these are definently the agx shocks and the right fitment for my car. Going to stick on a anti lift kit at the same time and then get a proper four wheel alignment done.

 

coolio, have a look at drop links at the same time. Had agx's and whiteline stuff on my old classic, handling was epic on it

 

I will do, moneys a bit tight just now new job, house savings etc etc but in the next couple of months Il get a 22mm rarb and heavy duty drop links all round. Ive got blue sti springs and a set of p1 springs. what ones would you recommend to use?

 

i has whiteline across the board bar agx shicks and eibach lowering springs