Hawkeye (2006) WRX - knocking shocks - KYB or Sachs?
04 December 2012, 03:18 PM
#1
Scooby Newbie
Thread Starter
Join Date: May 2012
Location: Up North!
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Hawkeye (2006) WRX - knocking shocks - KYB or Sachs?
Got the predictable knocking shocks on the rear and have used the KYB catalogue online which has come up with part codes ...
Rear Left - 334 359
KYB Right - 334 358
I presume the existing springs will fit and they are direct replacements?
Does anyone have any experience of fitting these or the Sachs equivalents?
Cheeeeeers
Rear Left - 334 359
KYB Right - 334 358
I presume the existing springs will fit and they are direct replacements?
Does anyone have any experience of fitting these or the Sachs equivalents?
Cheeeeeers
04 December 2012, 04:50 PM
#2
Scooby Regular
iTrader: (1)
Join Date: May 2012
Location: Sunderland
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
I replaced both rear shocks on my blob WRX 6 months back with KYB ones because of the dreaded Knocking and the original springs went straight on.
don't have the part numbers but I think they should be the same as a hawk WRX being 5x100. the main body of the shock is gold if that helps.
don't have the part numbers but I think they should be the same as a hawk WRX being 5x100. the main body of the shock is gold if that helps.
Last edited by mike2367; 04 December 2012 at 04:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post
