Spring upgrade for hawkeye saloon
#1
Scooby Regular
Thread Starter
Spring upgrade for hawkeye saloon
Guys,
Looking to upgrage my springs on my 2007 saloon, was thinking about the prodrive ones at £240 on the prodrive website any advice on alternatives or is prodrive the best way to go
Cheers Baz
Looking to upgrage my springs on my 2007 saloon, was thinking about the prodrive ones at £240 on the prodrive website any advice on alternatives or is prodrive the best way to go
Cheers Baz
#3
Scooby Regular
Join Date: Sep 2010
Location: Wakefield
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Hi pardon my ignorance as im new to the scooby scene but if you change springs to some that are lower than the stock ones will this mess the camber up? do you need to get adjustable camber arms or bolts.???? just wondered you needed to with my last car...civic.
#4
Scooby Regular
Join Date: Oct 2008
Location: North Ayrshire
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
I went from standard to Eibach springs on my MY05 wagon.
They were fine but after a while I felt they sat too high so went with BC coilovers and the car sits lower and I have 30 settings to play with.
As for adjusting camber bolts etc..not entirely sure you would get your geometry redone afterwards.
They were fine but after a while I felt they sat too high so went with BC coilovers and the car sits lower and I have 30 settings to play with.
As for adjusting camber bolts etc..not entirely sure you would get your geometry redone afterwards.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM