Jamz_

iTrader: (12)

Ive just lowered the Scooby today, and noticed the rear has quite a lot of positive camber now!

Is the rear adjustable? as i know on my focus the rear is only adjustable +-1 degree, which wouldn't be enough on the Scooby IMO.

fastboyslim

iTrader: (2)

You sure thats positive camber there mate? Most independent suspensions give negitive camber once dropped or lowered. This is what you need

http://cgi.ebay.co.uk/IMPREZA-WRX-ST...1%7C240%3A1318

Jamz_

iTrader: (12)

Deffo positive camber on both rears, the top of the tyres stick out more then the bottom

davedipster

Do the strut bottoms have slotted holes? or camber bolts fitted? if so move the bolt in the slot to make it max negative.
dipster

dunx

iTrader: (3)

Camskill sell camber bolts for £25 !

HTH

dunx

Arch

iTrader: (59)

Camber can be adjusted via camber bolts and strut top mounts if you have adjustable ones.

Jamz_

iTrader: (12)

these don't have top mount adjustment... just seems strange that there is positive camber on the wheels and not the usual negative camber.

I had a look, and i cannot see any adjustment bolts or anything

davedipster

The bottoms don't have slotted holes then?

The rookie

iTrader: (1)

Lower camber bolts won't look adjustable, you have to try them!

Simon

mattwrxCS

iTrader: (1)

Jack the rears up, loosen the two bolts and push the top of the wheel in as far as you can, then tighten up