whiteline anti roll bar
10 October 2007, 03:03 PM
#1
Scooby Regular
Thread Starter
Join Date: Mar 2005
Location: cornwall
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
whiteline anti roll bar
i have fitted a whitline anti roll bar and links to my version 6 sti,
about a week after fitting i noticed movement when the car was in a corner,there is quite a lot of play in the bar,does anyone have any suggestions on this or has this happened to anyone else??
i have put jubilee clips either side of the bar as a stop gap! although this has helped a bit it hasnt solved the problem.
any help would be greatly appreciated
about a week after fitting i noticed movement when the car was in a corner,there is quite a lot of play in the bar,does anyone have any suggestions on this or has this happened to anyone else??
i have put jubilee clips either side of the bar as a stop gap! although this has helped a bit it hasnt solved the problem.
any help would be greatly appreciated
10 October 2007, 06:02 PM
#2
1
There is usually lateral movement in the roll bars and the front on mine will move quite alarmingly, up to 20mm. I fitted clips as you have 3 years ago and they are still there.
2
Never had the prob on the rear (24mm bar), and you do not say front or rear in the above.
3
Either way, this movement should not be noticable when driving the car! (is that what you mean above?)
Graham.
There is usually lateral movement in the roll bars and the front on mine will move quite alarmingly, up to 20mm. I fitted clips as you have 3 years ago and they are still there.
2
Never had the prob on the rear (24mm bar), and you do not say front or rear in the above.
3
Either way, this movement should not be noticable when driving the car! (is that what you mean above?)
Graham.
10 October 2007, 06:35 PM
#3
Scooby Regular
Thread Starter
Join Date: Mar 2005
Location: cornwall
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
1
There is usually lateral movement in the roll bars and the front on mine will move quite alarmingly, up to 20mm. I fitted clips as you have 3 years ago and they are still there.
2
Never had the prob on the rear (24mm bar), and you do not say front or rear in the above.
3
Either way, this movement should not be noticable when driving the car! (is that what you mean above?)
Graham.
There is usually lateral movement in the roll bars and the front on mine will move quite alarmingly, up to 20mm. I fitted clips as you have 3 years ago and they are still there.
2
Never had the prob on the rear (24mm bar), and you do not say front or rear in the above.
3
Either way, this movement should not be noticable when driving the car! (is that what you mean above?)
Graham.
yeah its the front and its very noticable when hard cornering,i will redo the clips and if no joy after i will probably revert back to the standard roll bar.
thanks for your help
damian
10 October 2007, 08:06 PM
#4
Scooby Senior
iTrader: (3)
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes
on
0 Posts
I'm no expert but harder bushes may be needed to control the wishbones, I have the ALK fitted and it seems fine.... for now !
Dunx
Dunx
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM