Whiteline roll centre adjusters
08 May 2007, 11:24 AM
#1
Scooby Regular
Thread Starter
Join Date: Dec 2002
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
Whiteline roll centre adjusters
Hi,
Just to let everyone know that the new Whiteline front roll centre adjusters (KCA313)for the Impreza are now available through the Whiteline dealers. This set of ball joints and track rod ends raises the roll centre and shortens the roll couple, reducing the tendency of the car to 'roll off it's grip' at the front end.
Especially useful on lowered cars which very often have their rollcentre below ground level, with all the negatives associated with that.
Cheers
Just to let everyone know that the new Whiteline front roll centre adjusters (KCA313)for the Impreza are now available through the Whiteline dealers. This set of ball joints and track rod ends raises the roll centre and shortens the roll couple, reducing the tendency of the car to 'roll off it's grip' at the front end.
Especially useful on lowered cars which very often have their rollcentre below ground level, with all the negatives associated with that.
Cheers
08 May 2007, 01:20 PM
#3
Scooby Regular
Thread Starter
Join Date: Dec 2002
Posts: 206
Likes: 0
Received 0 Likes
on
0 Posts
10 May 2007, 12:50 PM
#5
I've realised what these actually are and do and I'm very curious to see what happens.
Getting the old ***** out of the uprights might be a tease but I hope i can get them in before the test day.
Graham
Getting the old ***** out of the uprights might be a tease but I hope i can get them in before the test day.
Graham
Trending Topics
19 May 2007, 10:29 PM
#9
I would have mine on if the ball joints were not rusted into the hubs.
Will get them on end of this week though.
The kit is a pair of lengthened ball joints and corresponding track rod ends with all hardwear to fit.
Should be a simple job!
Will need to find some better swear words!
Graham.
Will get them on end of this week though.
The kit is a pair of lengthened ball joints and corresponding track rod ends with all hardwear to fit.
Should be a simple job!
Will need to find some better swear words!
Graham.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM