Sway bar question
#1
Scooby Regular
Thread Starter
Join Date: Jun 2006
Location: Dublin, Ireland
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Sway bar question
Hey there, was just wondering does anyone know if the sway bars from a wrx will be the same as a little fish 1.6? Dont know much about the parts so they may even be from a saloon as mine's a 5rd.. thanks guys
#5
Scooby Regular
Join Date: Aug 2003
Location: evesham, worcester
Posts: 1,253
Likes: 0
Received 0 Likes
on
0 Posts
front one will be the same (maybe a smaller diameter) as the gc chassis is the same throughout the entire range
rear arb's aren't fitted as standard to non turbo cars, however they can be fitted easily using turbo parts or a specific kit from whiteline. this is the case with the 2.0's and 1.8's but i'm not 100% sure with the 1.6's especially if yours is front wheel drive - it will all depend on the struts, control arms etc etc as to whether there are the correct mounting points
check out www.imprezasport.net for loads more info on N/A subarus, if you haven't found it already
rear arb's aren't fitted as standard to non turbo cars, however they can be fitted easily using turbo parts or a specific kit from whiteline. this is the case with the 2.0's and 1.8's but i'm not 100% sure with the 1.6's especially if yours is front wheel drive - it will all depend on the struts, control arms etc etc as to whether there are the correct mounting points
check out www.imprezasport.net for loads more info on N/A subarus, if you haven't found it already
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM