evander

iTrader: (1)

I have 95 uk turbo, I was in to Subaru today to get a front anti roll bar link. The one I ended up going away with is for the P1 the guy told me the suspension has been modified since my car should have a plastic link. I had a look at the rear and I think that has been replaced aswell. The inner wishbone bolts on both sides look like they are cocentric to allow you to adjust camber. Did uk turbo,s have this? Can anyone tell me other things I should look out for?

WUZ

iTrader: (14)

All Imprezas have CAM bolts on the mounting points from Suspension strut to Hub ( 2 bolts - 1 normal, one Cam-shaped) which is used for camber adjustment.

Russell
BHP Developments, Aberdeen

evander

iTrader: (1)

Cheers mate, where do you mean. The ones Im talking about are not (Suspension strut to Hub) They are inboard where the 2 arms bolt to the chassis. The back one has just a bolt which looks like its cam shaped, the other other one infront is the same but it has a rubber toothed wheel which has (lock) stamped in to the rubber.

WUZ

iTrader: (14)

I think you are talking about the CASTOR Mounts which connect the chassis to the rear end of the wishbones. The LOCK bit is just to show if the bushing insert is tight into the mounting bracket.

Russell