Adjustable top mounts..
#1
Scooby Regular
Thread Starter
Join Date: Oct 2005
Location: Herts
Posts: 1,746
Likes: 0
Received 0 Likes
on
0 Posts
Adjustable top mounts..
i currently have some Eibach Pro street adjustable suspension fitted + anti roll + bumpsteer mod fitted and all set up by powerstation...
first question :
can i add aftermarket topmounts like HKS or TIEN to the above suspension?
second question :
will it improve handling by much, or it will just look nice under the bonnet??
many thanks
kevin
first question :
can i add aftermarket topmounts like HKS or TIEN to the above suspension?
second question :
will it improve handling by much, or it will just look nice under the bonnet??
many thanks
kevin
#2
Scooby Regular
iTrader: (4)
If Powerstation have set it up, top mounts won't necessarily make it better. The top mounts make adjusting the camber easier but as they don't have rubber as a noise insulator you will get more noise inside the car.
I have STi Bilstein Prodrive units and I needed to machine a set of dedicated washers to accept the Cusco adjustable top mounts. They are not always a bolt off and on fitment especially if you mix makes.
It could be hassle.
I have STi Bilstein Prodrive units and I needed to machine a set of dedicated washers to accept the Cusco adjustable top mounts. They are not always a bolt off and on fitment especially if you mix makes.
It could be hassle.
#3
Scooby Regular
Join Date: Oct 2000
Location: the fastest rentals in town......0-100mph in 10 seconds
Posts: 1,401
Likes: 0
Received 0 Likes
on
0 Posts
Forget the HKS/Tein variants which will only let you adjust the camber to levels far in excess of what you require on a road car and look at the Noltec versions which are Castor and Camber adjustable. Increasing the castor angle is always a good move
#4
Scooby Regular
As Mo says, with the Noltec topmounts you can dial-in loads more castor and that improves front-end turn-in and grip no end.
That alone will improve the handling significantly IMHO.
Get the Noltec street version if you are worried about excess noise. I have those on my RB5 (with P1 suspension) and it's perfectly fine.
Stefan
That alone will improve the handling significantly IMHO.
Get the Noltec street version if you are worried about excess noise. I have those on my RB5 (with P1 suspension) and it's perfectly fine.
Stefan
#5
Scooby Regular
Thread Starter
Join Date: Oct 2005
Location: Herts
Posts: 1,746
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ozzy
As Mo says, with the Noltec topmounts you can dial-in loads more castor and that improves front-end turn-in and grip no end.
That alone will improve the handling significantly IMHO.
Get the Noltec street version if you are worried about excess noise. I have those on my RB5 (with P1 suspension) and it's perfectly fine.
Stefan
That alone will improve the handling significantly IMHO.
Get the Noltec street version if you are worried about excess noise. I have those on my RB5 (with P1 suspension) and it's perfectly fine.
Stefan
so it will fit with my set up then?
thanks for the help
#6
#7
Scooby Regular
Don't see why it wouldn't fit your setup. As long as your Eibach Pro kit isn't weird or anything. The only other issue is the spring fouling the inner arch if you run too much camber/caster. Never see the Eibach kit, so can't say for sure in the real world.
I got mine from Momo Racing on a group buy for about £150. Well worth the money IMO.
I got mine from Momo Racing on a group buy for about £150. Well worth the money IMO.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM