leda-b coilovers
#1
Scooby Regular
Thread Starter
Join Date: Feb 2004
Location: nottm
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
leda-b coilovers
As my thread in tyres,I noticed wear on my tyres (mainly on the inside pass side).Had my mot today,and found that my front springs are shot.I know about the weight thing but would appreciate some help tracking some down on the net,I need to get the right ones.Cheers.
#2
First contact LEDA, they are good guys for spring types.
I think they use the very common 2 1/4 inch x 10'' race coil springs.
If you are lucky, your springs will still have the rate marked on them.
If not then LEDA will advise you.
Fitting is easy, but you might need to have the front aligned after as the top mount has to be disturbed (better than indoing the strut/hub connection)
Graham.
I think they use the very common 2 1/4 inch x 10'' race coil springs.
If you are lucky, your springs will still have the rate marked on them.
If not then LEDA will advise you.
Fitting is easy, but you might need to have the front aligned after as the top mount has to be disturbed (better than indoing the strut/hub connection)
Graham.
#3
Scooby Regular
Thread Starter
Join Date: Feb 2004
Location: nottm
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 911
First contact LEDA, they are good guys for spring types.
I think they use the very common 2 1/4 inch x 10'' race coil springs.
If you are lucky, your springs will still have the rate marked on them.
If not then LEDA will advise you.
Fitting is easy, but you might need to have the front aligned after as the top mount has to be disturbed (better than indoing the strut/hub connection)
Graham.
I think they use the very common 2 1/4 inch x 10'' race coil springs.
If you are lucky, your springs will still have the rate marked on them.
If not then LEDA will advise you.
Fitting is easy, but you might need to have the front aligned after as the top mount has to be disturbed (better than indoing the strut/hub connection)
Graham.
Thanks Graham,
Found them,they were really help full,just checking them for the mark,they seem to think that they might be 9"x2.5",they also said that they will have the equivilant as they might not do the ones I have on any more,thanks again.Cheers.
John
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM