Notices

ALK and New Settings

Old Mar 22, 2001 | 12:50 AM
  #1  
Ragos Elias's Avatar
Ragos Elias
Thread Starter
Scooby Regular
 
Joined: Nov 1998
Posts: 208
Likes: 0
Post


Hello,

Alk makes a difference to the G.settings.
What must be the new ones.
I am running with :
Camper front max negative and Toe 1mm in front and 1mm rear total.But the rear is a bit unstable on dry roads. Dont know on wet ones... cause in Greece we have no rain for 4 months now.( Weekend will hit 30 Celsious!!)

Elias
Reply
Old Mar 23, 2001 | 11:24 PM
  #2  
PeterPerfect's Avatar
PeterPerfect
Scooby Regular
 
Joined: Nov 1999
Posts: 556
Likes: 0
Talking

Hi Elias

I'll swap some of our English rain for some of your Greek sunshine

Might be worth sending am email to the guys at PowerStation about the ALK settings.

Pete
Reply
Old Mar 24, 2001 | 08:43 AM
  #3  
SecretAgentMan's Avatar
SecretAgentMan
Scooby Regular
 
Joined: Dec 2000
Posts: 2,912
Likes: 0
Post

The ALK shouldn't affect your toe and camber up front, it increases static caster.
I'd check the alignment anyway just to be sure that everything is OK.

Which in my humble experience does 2 things, decrease lift during accel, since the lifting force goes a bit less linear into the strut, and increases camber while turning.

BUT, as far as I know the ALK only changes caster about 1 degree...



/Jerry - Sweden (where the sun's been shining for a week, but it's still fuggin cold)



[This message has been edited by SecretAgentMan (edited 24 March 2001).]
Reply
Old Mar 25, 2001 | 09:10 PM
  #4  
AndyMc's Avatar
AndyMc
Scooby Regular
 
Joined: Nov 1999
Posts: 449
Likes: 0
Post

When I fitted the ALK the handling was crap at first.It turned out that fitting the kit had caused the wheels to toe in even though the instructions said it should not affect any of the settings.Once the tracking was reset it was much better than standard.

I found that the ALK made the rear of the car more stable and had the rear toe set to zero to make it a bit more lively.Its strange that the rear is unstable on your car

You don't have an uprated rear roll bar by any chance or different tyres front and rear?

Andy
Reply
Old Mar 27, 2001 | 03:24 PM
  #5  
Ragos Elias's Avatar
Ragos Elias
Thread Starter
Scooby Regular
 
Joined: Nov 1998
Posts: 208
Likes: 0
Post

Sorry for been so late in my answer.

I have fitted the rear stiffer sway bar too, setting it to the hardest possition after a while because I had a lot of body roll at the previous settings.At this moment things are better but not just as it was before fitting all that staff.
I mean when was running with light Prodrive setting of 0.75Neg caster front and 1mm front and rear.
The car was absolutely neutral.

Maybe the current settings are wrong but there must be a solution for better and more neutral handling.

Elias
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
Brumguy34
Subaru Parts
8
Oct 4, 2015 07:51 PM
blackieblob
ScoobyNet General
2
Oct 2, 2015 05:34 PM
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM


Thread Tools
Search this Thread

All times are GMT +1. The time now is 04:16 PM.