LedaB Question
21 October 2000, 04:23 PM
#1
Got my LedaB in a box in the boot. Want it on b4 Brands but 'cos PTMW! is a stealth car ( 
) I am logistically unable to get it & me to Braintree for 4 hrs whilst they set it up.
I can however, get to Elite in Rainham & leave it there for the day. I've always found them very helpful & knowledgeable but obviously not the same as Leda themselves.
Other than setting the ride height & re-doing the geometry, is there anything else I should be aware of or telling them? Leda talk about corner weights & such like - is this relevant?
I can't not have it on for Brands
Any advice gratefully received
) I am logistically unable to get it & me to Braintree for 4 hrs whilst they set it up.I can however, get to Elite in Rainham & leave it there for the day. I've always found them very helpful & knowledgeable but obviously not the same as Leda themselves.
Other than setting the ride height & re-doing the geometry, is there anything else I should be aware of or telling them? Leda talk about corner weights & such like - is this relevant?
I can't not have it on for Brands
Any advice gratefully received
22 October 2000, 06:56 PM
#3
Hey Dogbreath!
I can work it (at home & work) to take car to Elite which is 15/20 mins away. I can blag a ride in & out bike/car/van & again out in the afternoon. Braintree is more of a prob
Twas because SS didn't start on my brakes 'til 09.10 (not 08.00) that I had to abort due to time constraints.
Are you coming to Brands for a look-see? I'll take you for a few laps. I don't want any excuses - just go "visit a client" or something.
I can work it (at home & work) to take car to Elite which is 15/20 mins away. I can blag a ride in & out bike/car/van & again out in the afternoon. Braintree is more of a prob
Twas because SS didn't start on my brakes 'til 09.10 (not 08.00) that I had to abort due to time constraints.Are you coming to Brands for a look-see? I'll take you for a few laps. I don't want any excuses - just go "visit a client" or something.
23 October 2000, 09:12 PM
#4
I too had time constrants on my visit to Leda after a delay at SS for fitting braided hoses etc etc.(forgetting the locking wheel key didn't help!!) I arrived at 1.15pm and 5 or 6 guys descended on the car as Pete had phoned ahead and told them I had to get back to Bristol. I left Leda after all fitting, ride height adjusting and corner weights etc, plus a test drive at 2.10pm!
You may want to speak to Leda direct and ask them if they can turn you round extra quick.
Steve.
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM