BHORT

I have been quoted £24/hour for geometry changes at RM Services Hathern, leicestershire but they seemed a bit non-commital as to how long it would take, probably between 2 and 3 hours. Does the price and time sound about right?

Brendan

Trout

iTrader: (1)

Micheldever can do the full works, front and rear on a laser set up for about £40. The full monty takes about 45 minutes.

Front set up alone is £18.

Andy Tang

iTrader: (3)

Does anyone have the phone number for Micheldever?

Thanks in advance
Andy

pumpers

i'm paying 65 at c + k manchester tomorrow (also having alk fited)

RichB

I had mine done at Micheldever and it cost about £30 all in. Took about about 30-45 minutes. They do know what they are doing there, not the easiest place to find though!
RichB

Danny Fisher

Is there a phone number and location about for Micheldever please!

Steve Howat

Danny/Andy.

Phone number is: 01962 774437
Address is:
Micheldever Station
Winchester
Hampshire.

Micheldever is off of the old Winchester/Basingstoke road (a bit in the sticks). About 4 miles outside Winchester I think.

Hope this helps.

Steve.

[This message has been edited by Steve Howat (edited 12-01-2000).]

Danny Fisher

I have just spoken with my local dealer, and they are happy to check / change the geometry. I also checked to see if they would have any problems changing the settings to said Prodrive, no problem. Cost £52. Shame that I'm so far away from Micheldever.

Anyway booked it in straight away.

Dan