Bushes Replacement costs???
#1
I've just got my car back from PE after its 52500 mile service and the invoice states that :
NEEDS REAR BEAM BUSHES
NEEDS FRONT ARB(?) BUSHES
What kind of cost am I looking at to supply & fit these parts. Is the car unsafe if they need replacing?
Gary
[Edited by GaryCat - 25/01/2003 14:36:26]
NEEDS REAR BEAM BUSHES
NEEDS FRONT ARB(?) BUSHES
What kind of cost am I looking at to supply & fit these parts. Is the car unsafe if they need replacing?
Gary
[Edited by GaryCat - 25/01/2003 14:36:26]
#2
NEEDS REAR BEAM BUSHES
NEEDS FRONT ARB(?) BUSHES
ARB - Anti roll bar
Powerflex are one company that do the bushes you want. There are a few tuning companies on the banner boards that do them.
If you have to replace the ARB bushes (12.95ea x 4 = £51.80) you may as well replace the ARB drop links (£41 pair) which has the bushes you need in them already!
Powerflex website
NEEDS FRONT ARB(?) BUSHES
ARB - Anti roll bar
Powerflex are one company that do the bushes you want. There are a few tuning companies on the banner boards that do them.
If you have to replace the ARB bushes (12.95ea x 4 = £51.80) you may as well replace the ARB drop links (£41 pair) which has the bushes you need in them already!
Powerflex website
#3
As for the rear beam bushes I guess you would be looking at about £10/12 each and there will probably be 4. I will have a look and may post again later if I have time.
Fitting - The rear ARB drop links are fairly easy to do, just jack the car up so the suspension is off load then give it a go. If a garage will be doing it then no more than 1/2 - 1 hour labour cost.
Cannot say for the rear beam bushes though, do not want to give false info. Watch this space.
Nezz.
Fitting - The rear ARB drop links are fairly easy to do, just jack the car up so the suspension is off load then give it a go. If a garage will be doing it then no more than 1/2 - 1 hour labour cost.
Cannot say for the rear beam bushes though, do not want to give false info. Watch this space.
Nezz.
#4
gary,
goto powerflex's website and look at the tehnical drawing for the impreza. front ARB bushes (2 off - item 3), my granny could fit. the rear beam (2 off - item 8) is more difficult as you have to drop the diff to get the old ones out. my granny could still fit them if i talked her through it.
stu.
goto powerflex's website and look at the tehnical drawing for the impreza. front ARB bushes (2 off - item 3), my granny could fit. the rear beam (2 off - item 8) is more difficult as you have to drop the diff to get the old ones out. my granny could still fit them if i talked her through it.
stu.
Thread
Thread Starter
Forum
Replies
Last Post