Jaysz

Are these still available to buy.

2pot

iTrader: (3)

@TurboMaup had a set for sale, without bump stops.
I could sell you the matching bump stops/dust boots (depends on what dampers you use), if he's still got the springs?

Jaysz

ok do you know how i contact him
J

Jaysz

Would the bumpstops fit gab super adjustables

2pot

iTrader: (3)

£55 delivered bump stops only - use your oem dust boots.

£75 delivered - bump stops and dust boots

Jaysz

Ok just need to find out how to contact
TurboMaup first

2pot

iTrader: (3)

Send him a PM?

Jaysz

Do you have a link
to any of his posts
I looking but not found any yet

RobsyUK

iTrader: (2)

@TurboMaup

Jaysz

There already sold
would the ride height be the same as jdm v6 springs.

2pot

iTrader: (3)

Very similar spring rates 40N/m front, 35N/m rear, but linear, from ride height to coil bind.
Ride heights are lower (require different bump stops), 330-335mm front, 335-340mm rear (depends on fuel level and rear gas fill pressure in the strut - inverted struts run with a higher fill pressure).

https://images2.imagebam.com/53/a0/5...1059325334.jpg

http://images.imagebam.com/c4/29/3f/bae0c8561213133.jpg

http://images.imagebam.com/f4/04/d9/ee45ba561213143.jpg

http://images.imagebam.com/20/c2/ef/13e945561219943.jpg

Jaysz

Ok thanks
do you know the difference in heights
are all pics wr springs .

2pot

iTrader: (3)

Yes, all wr springs on non-inverted struts.
Measure your ride heights (wheel centre to arch) - as amount of lowering will depend on the current condition/durometer of bushings, top mounts, dampers, fuel level and spring sag.

wr15r/t with inverted struts: