Hello mates,

I've found out, that the outer bushings of my rear sub-frame are worn really bad and they are producing some loud clonking noises during load changes.

Are there some aftermarket bushings which don't require a hydraulic press? Because I don't want to remove the rear sub-frame just to change the bushings.

PowerFlex offer some rear sub-frame bushings which look like they dont need to get pressed in. Am I right with this?

Cheers

 

Hi I've changed these for poly bushes from power flex you don't need to press them in but taking the old ones out can be a pig so you will have to take off the outrigger it's not hard to do mate

 

Ok, thanks mate for your very helpful answer