Replacement of Rear Subframe bushings
#1
Scooby Newbie
Thread Starter
Join Date: Dec 2016
Location: Straubing
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Replacement of Rear Subframe bushings
Hello mates,
I've found out, that the outer bushings of my rear sub-frame are worn really bad and they are producing some loud clonking noises during load changes.
Are there some aftermarket bushings which don't require a hydraulic press? Because I don't want to remove the rear sub-frame just to change the bushings.
PowerFlex offer some rear sub-frame bushings which look like they dont need to get pressed in. Am I right with this?
Cheers
I've found out, that the outer bushings of my rear sub-frame are worn really bad and they are producing some loud clonking noises during load changes.
Are there some aftermarket bushings which don't require a hydraulic press? Because I don't want to remove the rear sub-frame just to change the bushings.
PowerFlex offer some rear sub-frame bushings which look like they dont need to get pressed in. Am I right with this?
Cheers
#2
Hi I've changed these for poly bushes from power flex you don't need to press them in but taking the old ones out can be a pig so you will have to take off the outrigger it's not hard to do mate