ARB bush size for Blobeye Wagon
ARB bush size for Blobeye Wagon
Can someone please confirm the size of the front and rear ARB bushes for a blobeye wagon (2005)? Not sure it it's 19mm or 20mm.
Many thanks!
Many thanks!
Hi there
I think front one is 20mm and rear one 17mm
https://www.scoobynet.com/suspension...rb-on-wrx.html
Thanks,Jura
I think front one is 20mm and rear one 17mm
https://www.scoobynet.com/suspension...rb-on-wrx.html
Thanks,Jura
Scooby Regular
Joined: May 2012
Posts: 168
Likes: 0
From: Scotland
Yeah the front is 20mm on both the STI and WRX, the rear on the WRX Saloons are definitely 17mm and STI's are 19mm.
Just double check in case the wagons have a 19mm bar because they are estates, as some manufactures uprate the rear arb.
Stick some verniers on it and see if you can.
If you don't have any a rougher way would be to wrap some thin cord/wire round it then take it off and measure the length.
17mm OD is as close as makes no difference 53.5mm and 19mm OD is 60mm.
You should be able to work it out with 6.5mm of difference.
Just double check in case the wagons have a 19mm bar because they are estates, as some manufactures uprate the rear arb.
Stick some verniers on it and see if you can.
If you don't have any a rougher way would be to wrap some thin cord/wire round it then take it off and measure the length.
17mm OD is as close as makes no difference 53.5mm and 19mm OD is 60mm.
You should be able to work it out with 6.5mm of difference.
Yeah the front is 20mm on both the STI and WRX, the rear on the WRX Saloons are definitely 17mm and STI's are 19mm.
Just double check in case the wagons have a 19mm bar because they are estates, as some manufactures uprate the rear arb.
Stick some verniers on it and see if you can.
If you don't have any a rougher way would be to wrap some thin cord/wire round it then take it off and measure the length.
17mm OD is as close as makes no difference 53.5mm and 19mm OD is 60mm.
You should be able to work it out with 6.5mm of difference.
Just double check in case the wagons have a 19mm bar because they are estates, as some manufactures uprate the rear arb.
Stick some verniers on it and see if you can.
If you don't have any a rougher way would be to wrap some thin cord/wire round it then take it off and measure the length.
17mm OD is as close as makes no difference 53.5mm and 19mm OD is 60mm.
You should be able to work it out with 6.5mm of difference.
Thread
Thread Starter
Forum
Replies
Last Post
