Godspeed 335mm WRX front brakes and uprated Rears
29 August 2013, 07:10 PM
#1
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Mar 2006
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
Godspeed 335mm WRX front brakes and uprated Rears
I have a full set of WRX brakes for sale consisting of:
Godspeed 335mm front brake kit, Discs, bells, EBC Blue stuff pads & calipers.
Godpseed grooved rear discs, calipers and EBC Blue stuff pads.
Front discs are about half worn - grooves are 1mm new and have about 0.5mm now. Rears have slightly more.
The EBC Blue stuff pads have done 871 miles (virtually new) and cost £220 from Godspeed.
There are no hoses/braided hoses with this kit.
All seals are perfect but one piston on each of the fronts is sticking slightly - they are not seized and appear clean. 3 pistons can be easily pushed back by hand but the sticky one needs slight pressure with a pair of pliers.
The above has all come off of my 57 plate GB270 and are in good to very good condition.
Original invoice from Godspeed and invoice for pads from Godspeed can be supplied if required.
All uncleaned and as came off car so nothing to hide - can/will be cleaned before posting.
Looking for £500 as a full set and prefer not to split, this price takes into account the sticky piston. Stainless steel pistons from Godspeed are £15 each or £80 for a set of 8 I believe. Buyer pays postage and ebay fees if paying that way.
Cheers.
Godspeed 335mm front brake kit, Discs, bells, EBC Blue stuff pads & calipers.
Godpseed grooved rear discs, calipers and EBC Blue stuff pads.
Front discs are about half worn - grooves are 1mm new and have about 0.5mm now. Rears have slightly more.
The EBC Blue stuff pads have done 871 miles (virtually new) and cost £220 from Godspeed.
There are no hoses/braided hoses with this kit.
All seals are perfect but one piston on each of the fronts is sticking slightly - they are not seized and appear clean. 3 pistons can be easily pushed back by hand but the sticky one needs slight pressure with a pair of pliers.
The above has all come off of my 57 plate GB270 and are in good to very good condition.
Original invoice from Godspeed and invoice for pads from Godspeed can be supplied if required.
All uncleaned and as came off car so nothing to hide - can/will be cleaned before posting.
Looking for £500 as a full set and prefer not to split, this price takes into account the sticky piston. Stainless steel pistons from Godspeed are £15 each or £80 for a set of 8 I believe. Buyer pays postage and ebay fees if paying that way.
Cheers.
Last edited by henrysmith; 29 August 2013 at 07:12 PM.
09 September 2013, 11:25 AM
#4
Scooby Regular
iTrader: (1)
Join Date: Aug 2013
Location: Manchester
Posts: 262
Likes: 0
Received 0 Likes
on
0 Posts
Would these fit my classic type r? Iv already got the 4pots and 2pots callipers. Just wondering if you get no interest how much would u take for the discs and pads?
09 September 2013, 06:06 PM
#5
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Mar 2006
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
First question is what size wheels - you could speak to godspeed to confirm if they will fit - they fit under most 17 inch wheels.
The front calipers get split and have spacers put in to accommodate the thicker discs so the only split I could really do is splitting between front and rear sets.
You could sell on your front calipers after changing if you want - would take too much time to take calipers apart and remove spacers etc.
Cheers
The front calipers get split and have spacers put in to accommodate the thicker discs so the only split I could really do is splitting between front and rear sets.
You could sell on your front calipers after changing if you want - would take too much time to take calipers apart and remove spacers etc.
Cheers
Trending Topics
01 October 2013, 06:52 AM
#14
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Mar 2006
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
This is everything bar hoses, brackets are still fitted to callipers so even easier to fit. So complete kit
To fit the fronts you have to tap (or have tapped) the two existing holes in the front hubs - as I recall it's a 14X1.75 thread but can confirm when required. This is an easy job to do - I did it myself and no probs.
To fit the fronts you have to tap (or have tapped) the two existing holes in the front hubs - as I recall it's a 14X1.75 thread but can confirm when required. This is an easy job to do - I did it myself and no probs.
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM