FMIC kit for newage (BRAND NEW)
11 July 2013, 02:38 PM
#1
Scooby Regular
Thread Starter
iTrader: (17)
Join Date: Nov 2011
Location: London
Posts: 1,425
Likes: 0
Received 0 Likes
on
0 Posts
FMIC kit for newage (BRAND NEW)
Hello All!
I have a brand new FMIC kit that has everything you will need to fit before a remap for sale.
I bought the kit in bits, so I could have it to my spec, I wanted the pipes to be 2.5" and the cooler to be medium size, to keep lag to a minimum, but be able to flow well too (its slightly bigger than the newage STI TMIC).
The intercooler is from 2fast2cool (same as japspeed, known to have very good cores) is 2.5" at inlet and outlet - New
Slam panel adaptor - New
Pipes are 2.5" bore, coolant overflow reservoir and fitting (most kits don't come with this!), MAF pipe fitting, all silicone couplers and clips that you will need - All New
Zero Sport induction kit (needed on a FMIC and costs almost £200 new) which is highly rated, some say its one of the best kits around. Has green bracket (not in pic) to secure it and stop damaging vibrations to MAF - Used
Harvey FMIC BOV adaptor, lets you use the OEM or OEM fitting BOV's. Really hard to find these days! If you don't have an aftermarket BOV, this will save you money when fitting the kit, and let you use one of the most reliable valves on the market, the Subaru valve! - Used
In the picture I've separated the pipes, so you can see the cold side pipes on the left, and the hot side pipes on the right.
I will also email or print off full colour instructions on how to fit the kit for the buyer.
I'm after £280 for the lot + delivery (will fit into 2 box's and cost about £40 for next day delivery) but would prefer pick up from London, E4 9JF.
Cheers
I have a brand new FMIC kit that has everything you will need to fit before a remap for sale.
I bought the kit in bits, so I could have it to my spec, I wanted the pipes to be 2.5" and the cooler to be medium size, to keep lag to a minimum, but be able to flow well too (its slightly bigger than the newage STI TMIC).
The intercooler is from 2fast2cool (same as japspeed, known to have very good cores) is 2.5" at inlet and outlet - New
Slam panel adaptor - New
Pipes are 2.5" bore, coolant overflow reservoir and fitting (most kits don't come with this!), MAF pipe fitting, all silicone couplers and clips that you will need - All New
Zero Sport induction kit (needed on a FMIC and costs almost £200 new) which is highly rated, some say its one of the best kits around. Has green bracket (not in pic) to secure it and stop damaging vibrations to MAF - Used
Harvey FMIC BOV adaptor, lets you use the OEM or OEM fitting BOV's. Really hard to find these days! If you don't have an aftermarket BOV, this will save you money when fitting the kit, and let you use one of the most reliable valves on the market, the Subaru valve! - Used
In the picture I've separated the pipes, so you can see the cold side pipes on the left, and the hot side pipes on the right.
I will also email or print off full colour instructions on how to fit the kit for the buyer.
I'm after £280 for the lot + delivery (will fit into 2 box's and cost about £40 for next day delivery) but would prefer pick up from London, E4 9JF.
Cheers
Last edited by Reshard1977; 12 July 2013 at 06:06 PM.
Thread
Thread Starter
Forum
Replies
Last Post
MightyArsenal
Wheels, Tyres & Brakes
6
25 September 2015 08:31 PM