60MM Defi CLASSIC gauge setup, Turbo Timer
30 June 2013, 08:51 AM
#1
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Jun 2001
Location: Stalking Kate Beckinsale
Posts: 4,265
Likes: 0
Received 0 Likes
on
0 Posts
60MM Defi CLASSIC gauge setup, Turbo Timer
Hi guys.
Due to having an identical Defi setup in the Blob, the Defi setup from my classic is no longer needed.
Great condition and in perfect working order, I even bought a new boost sender module a couple of months ago when I thought I was keeping the classic.
I don't need to go on about just how good these gauges are, if you are reading this then you probably already know. The light up green to match the classic too and of course have the classic Defi sweep.
What you get:
Defi 60mm Boost Gauge
Defi 60mm Oil Temperature Gauge
Defi 60mm Oil Pressure Gauge
Defi Link II Control Unit
Boost Pressure Sensor
Oil Temp Sensor
Oil Pressure Sensor
All necessary cables
What you also get:
TRIPLE 60MM A Pillar Pod, has around 4 screwholes in from where I secured it to the existing A Pillar trim for maximum rigidity
Modified A Pillar trim too for 4 door Impreza if wanted as it is of no use to me.
I will take current pics of the kit later on but here are various pics of the kit fitted:
http://www.ftaclan.net/fluffy/images/big/exterior4.jpg
http://www.ftaclan.net/fluffy/images/big/interior1.jpg
http://www.ftaclan.net/fluffy/images/big/interior5.jpg
http://www.ftaclan.net/fluffy/images/big/interior6.jpg
http://www.ftaclan.net/fluffy/images/big/interior14.jpg
http://www.ftaclan.net/fluffy/images/big/interior15.jpg
£400 collected from Farnham, Surrey. If I have to I can arrange courier but awkward shape if including modified A Pillar too, £415 including delivery . Manual link here - http://www.defi-shop.com/media/dlink.pdf
-------------------------------
Blitz FATT DC Fully Automatic Turbo Timer and correct harness for near-plug&play fitting in to a Classic Impreza (well, later classic for absolute certain, possibly earlier ones too?).
Perfect working order but due to how **** I was with fitting the display/control unit, I used a bit of Super Glue placing it/hiding the cable. I have removed the unit as carefully as possible but there is some glue on the bottom of the display unit (can't see it unless you actually look under it, but also around the cable exit point from the display). I also used some glue to direct the cable out of the back of the unit but I have cut that back to free up the cable again to you can place it however you like but I have to mention it.
Will take current pics later and post them up but here is an image or two of it fitted in to mine:
http://www.ftaclan.net/fluffy/images/big/interior13.jpg
http://www.ftaclan.net/fluffy/images/big/interior9.jpg
Not that you need it due to having the harness, but here is the raw wiring to my knowledge - http://www.clubwrx.net/forums/interi...tml#post641963
£50 delivered for the Turbo Timer and Harness.
Thanks,
Nick
Due to having an identical Defi setup in the Blob, the Defi setup from my classic is no longer needed.
Great condition and in perfect working order, I even bought a new boost sender module a couple of months ago when I thought I was keeping the classic.
I don't need to go on about just how good these gauges are, if you are reading this then you probably already know. The light up green to match the classic too and of course have the classic Defi sweep.
What you get:
Defi 60mm Boost Gauge
Defi 60mm Oil Temperature Gauge
Defi 60mm Oil Pressure Gauge
Defi Link II Control Unit
Boost Pressure Sensor
Oil Temp Sensor
Oil Pressure Sensor
All necessary cables
What you also get:
TRIPLE 60MM A Pillar Pod, has around 4 screwholes in from where I secured it to the existing A Pillar trim for maximum rigidity
Modified A Pillar trim too for 4 door Impreza if wanted as it is of no use to me.
I will take current pics of the kit later on but here are various pics of the kit fitted:
http://www.ftaclan.net/fluffy/images/big/exterior4.jpg
http://www.ftaclan.net/fluffy/images/big/interior1.jpg
http://www.ftaclan.net/fluffy/images/big/interior5.jpg
http://www.ftaclan.net/fluffy/images/big/interior6.jpg
http://www.ftaclan.net/fluffy/images/big/interior14.jpg
http://www.ftaclan.net/fluffy/images/big/interior15.jpg
£400 collected from Farnham, Surrey. If I have to I can arrange courier but awkward shape if including modified A Pillar too, £415 including delivery . Manual link here - http://www.defi-shop.com/media/dlink.pdf
-------------------------------
Blitz FATT DC Fully Automatic Turbo Timer and correct harness for near-plug&play fitting in to a Classic Impreza (well, later classic for absolute certain, possibly earlier ones too?).
Perfect working order but due to how **** I was with fitting the display/control unit, I used a bit of Super Glue placing it/hiding the cable. I have removed the unit as carefully as possible but there is some glue on the bottom of the display unit (can't see it unless you actually look under it, but also around the cable exit point from the display). I also used some glue to direct the cable out of the back of the unit but I have cut that back to free up the cable again to you can place it however you like but I have to mention it.
Will take current pics later and post them up but here is an image or two of it fitted in to mine:
http://www.ftaclan.net/fluffy/images/big/interior13.jpg
http://www.ftaclan.net/fluffy/images/big/interior9.jpg
Not that you need it due to having the harness, but here is the raw wiring to my knowledge - http://www.clubwrx.net/forums/interi...tml#post641963
£50 delivered for the Turbo Timer and Harness.
Thanks,
Nick
Last edited by Mr Footlong; 26 August 2013 at 11:00 AM. Reason: Price drop on the Defi setup.
30 June 2013, 03:50 PM
#3
Scooby Regular
Thread Starter
iTrader: (7)
Join Date: Jun 2001
Location: Stalking Kate Beckinsale
Posts: 4,265
Likes: 0
Received 0 Likes
on
0 Posts
Hi there. Sorry but just to clarify, the £450 was for collection. I can sort out delivery but that will be £460 and even then I will be absorbing a bit of the cost.
If you are happy to go ahead with that then please PM me with how you want to pay. Either Bank Transfer or Paypal if fees are covered.
Picture of the bits attached, please let me know if you want the entire A Pillar trim too or not.
I have also attached pics of the Turbo Timer.
If you are happy to go ahead with that then please PM me with how you want to pay. Either Bank Transfer or Paypal if fees are covered.
Picture of the bits attached, please let me know if you want the entire A Pillar trim too or not.
I have also attached pics of the Turbo Timer.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
blockhead
Subaru Parts
19
07 November 2015 11:50 PM